Author: adrian Date: Wed Nov 18 06:25:25 2015 New Revision: 291011 URL: https://svnweb.freebsd.org/changeset/base/291011
Log: Add the QCA9533 base configuration file and an example configuration for the AP143. Wifi doesn't work on the QCA9533 board, but basic ethernet/ethernet and ethernet switch support does work. The AP143 has 32MB RAM and 4MB flash, so this was tested with a USB rootfs. Tested: * QCA9533v2, AP143 reference design board. Added: head/sys/mips/conf/AP143 (contents, props changed) head/sys/mips/conf/AP143.hints (contents, props changed) head/sys/mips/conf/QCA953X_BASE (contents, props changed) head/sys/mips/conf/QCA953X_BASE.hints (contents, props changed) Added: head/sys/mips/conf/AP143 ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/conf/AP143 Wed Nov 18 06:25:25 2015 (r291011) @@ -0,0 +1,51 @@ +# +# AP143 - the AP143 reference board from Qualcomm Atheros includes: +# +# * AR9330 SoC +# * 32MB RAM +# * 4MB flash +# * Integrated 1x1 2GHz wifi and 10/100 bridge +# +# $FreeBSD$ +# + +# Include the default QCA953x parameters +include "QCA953X_BASE" + +ident AP143 + +# Override hints with board values +hints "AP143.hints" + +# Force the board memory - the base AP121 only has 16MB RAM +options AR71XX_REALMEM=(32*1024*1024) + +# i2c GPIO bus +#device gpioiic +#device iicbb +#device iicbus +#device iic + +# Options required for miiproxy and mdiobus +options ARGE_MDIO # Export an MDIO bus separate from arge +device miiproxy # MDIO bus <-> MII PHY rendezvous + +device etherswitch +device arswitch + +# read MSDOS formatted disks - USB +#options MSDOSFS + +# Enable the uboot environment stuff rather then the +# redboot stuff. +options AR71XX_ENV_UBOOT + +# uzip - to boot natively from flash +device geom_uncompress +options GEOM_UNCOMPRESS + +# Used for the static uboot partition map +device geom_map + +# Boot off of the rootfs, as defined in the geom_map setup. +options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\" Added: head/sys/mips/conf/AP143.hints ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/conf/AP143.hints Wed Nov 18 06:25:25 2015 (r291011) @@ -0,0 +1,105 @@ +# +# This file adds to the values in QCA953X_BASE.hints. +# +# $FreeBSD$ + +# Embedded Atheros Switch +hint.arswitch.0.at="mdio1" +hint.arswitch.0.is_7240=0 +hint.arswitch.0.is_9340=1 +hint.arswitch.0.numphys=4 +hint.arswitch.0.phy4cpu=1 # phy 4 is a "CPU" separate PHY +hint.arswitch.0.is_rgmii=0 +hint.arswitch.0.is_gmii=1 # arge1 <-> switch PHY is GMII + +# arge0 - MII, autoneg, phy(4) +# MAC for arge0 is the first 6 bytes of the ART +hint.arge.0.eeprommac=0x1fff0000 +hint.arge.0.phymask=0x10 # PHY4 +hint.arge.0.mdio=mdioproxy2 # .. off of the switch mdiobus + +# arge1 - GMII, 1000/full +hint.arge.1.eeprommac=0x1fff0006 +hint.arge.1.phymask=0x0 # No directly mapped PHYs +hint.arge.1.media=1000 +hint.arge.1.fduplex=1 + +# The AP121 4MB flash layout: +# +# bootargs=console=ttyS0,115200 root=31:02 rootfstype=squashfs +# init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env), +# 2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART) +# +# So: +# 256k: uboot +# 64: uboot-env +# 2752k: rootfs +# 896k: kernel +# 64k: config +# 64k: ART + +hint.map.0.at="flash/spi0" +hint.map.0.start=0x00000000 +hint.map.0.end=0x000040000 +hint.map.0.name="uboot" +hint.map.0.readonly=1 + +hint.map.1.at="flash/spi0" +hint.map.1.start=0x00040000 +hint.map.1.end=0x00050000 +hint.map.1.name="uboot-env" +hint.map.1.readonly=0 + +hint.map.2.at="flash/spi0" +hint.map.2.start=0x00050000 +hint.map.2.end=0x00300000 +hint.map.2.name="rootfs" +hint.map.2.readonly=0 + +hint.map.3.at="flash/spi0" +hint.map.3.start=0x00300000 +hint.map.3.end=0x003e0000 +hint.map.3.name="kernel" +hint.map.3.readonly=0 + +hint.map.4.at="flash/spi0" +hint.map.4.start=0x003e0000 +hint.map.4.end=0x003f0000 +hint.map.4.name="cfg" +hint.map.4.readonly=0 + +# This is radio calibration section. It is (or should be!) unique +# for each board, to take into account thermal and electrical differences +# as well as the regulatory compliance data. +# +hint.map.5.at="flash/spi0" +hint.map.5.start=0x003f0000 +hint.map.5.end=0x00400000 +hint.map.5.name="art" +hint.map.5.readonly=1 + +# GPIO specific configuration block + +# Don't flip on anything that isn't already enabled. +# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're +# not used here. +hint.gpio.0.function_set=0x00000000 +hint.gpio.0.function_clear=0x00000000 + +# These are the GPIO LEDs and buttons which can be software controlled. +#hint.gpio.0.pinmask=0x001c02ae +# hint.gpio.0.pinmask=0x00001803 + +# gpio0 - WLAN LED +# gpio1 - USB LED +# gpio11 - Jumpstart button +# gpio12 - Reset button + +# LEDs are configured separately and driven by the LED device +#hint.gpioled.0.at="gpiobus0" +#hint.gpioled.0.name="wlan" +#hint.gpioled.0.pins=0x0001 + +#hint.gpioled.1.at="gpiobus0" +#hint.gpioled.1.name="usb" +#hint.gpioled.1.pins=0x0002 Added: head/sys/mips/conf/QCA953X_BASE ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/conf/QCA953X_BASE Wed Nov 18 06:25:25 2015 (r291011) @@ -0,0 +1,138 @@ +# +# QCA953x -- Kernel configuration base file for the Qualcomm Atheros QCA953x SoC. +# +# This file (and the hints file accompanying it) are not designed to be +# used by themselves. Instead, users of this file should create a kernel +# config file which includes this file (which gets the basic hints), then +# override the default options (adding devices as needed) and adding +# hints as needed (for example, the GPIO and LAN PHY.) +# +# $FreeBSD$ +# + +machine mips mips +ident QCA953X_BASE +cpu CPU_MIPS4KC +makeoptions KERNLOADADDR=0x80050000 +options HZ=1000 + +files "../atheros/files.ar71xx" +hints "QCA953X_BASE.hints" + +makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols +makeoptions MODULES_OVERRIDE="gpio ar71xx if_gif if_vlan if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr hwpmc ipfw" + +options DDB +options KDB +options ALQ +options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER + +options SCHED_4BSD #4BSD scheduler +options INET #InterNETworking +#options INET6 #InterNETworking +#options NFSCL #Network Filesystem Client +options PSEUDOFS #Pseudo-filesystem framework +options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions + +# Don't include the SCSI/CAM strings in the default build +options SCSI_NO_SENSE_STRINGS +options SCSI_NO_OP_STRINGS + +# .. And no sysctl strings +options NO_SYSCTL_DESCR + +# For small memory footprints +options VM_KMEM_SIZE_SCALE=1 + +# Limit IO size +options NBUF=128 + +# Limit UMTX hash size +# options UMTX_NUM_CHAINS=64 + +#options UMA_DEBUG_ALLOC + +# PMC +options HWPMC_HOOKS +#options HWPMC_MIPS_BACKTRACE +device hwpmc +device hwpmc_mips24k + +options ARGE_DEBUG + +# options NFS_LEGACYRPC +# Debugging for use in -current +options INVARIANTS +options INVARIANT_SUPPORT +options WITNESS +options WITNESS_SKIPSPIN +options FFS #Berkeley Fast Filesystem +#options SOFTUPDATES #Enable FFS soft updates support +#options UFS_ACL #Support for access control lists +#options UFS_DIRHASH #Improve performance on big directories +options NO_FFS_SNAPSHOT # We don't require snapshot support + +options IPFIREWALL_DEFAULT_TO_ACCEPT + +# Wireless NIC cards +options IEEE80211_DEBUG +options IEEE80211_SUPPORT_MESH +options IEEE80211_SUPPORT_TDMA +options IEEE80211_SUPPORT_SUPERG +options IEEE80211_ALQ # 802.11 ALQ logging support +device wlan # 802.11 support +device wlan_wep # 802.11 WEP support +device wlan_ccmp # 802.11 CCMP support +device wlan_tkip # 802.11 TKIP support +device wlan_xauth # 802.11 hostap support + +# ath(4) +device ath # Atheros network device +device ath_rate_sample +device ath_ahb # Atheros host bus glue +options ATH_DEBUG +options ATH_DIAGAPI +option ATH_ENABLE_11N +option AH_DEBUG_ALQ + +#device ath_hal +device ath_ar9300 # AR9330 HAL; no need for the others +option AH_DEBUG +option AH_SUPPORT_AR5416 # 11n HAL support +option AH_SUPPORT_AR9330 # Chipset support +option AH_AR5416_INTERRUPT_MITIGATION + +device mii +device arge + +device usb +options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order +options USB_DEBUG +options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this +device ehci + +device scbus +device umass +device da + +device spibus +device ar71xx_spi +device mx25l +device ar71xx_wdog + +# Handle 25MHz refclock by allowing a higher baudrate error tolerance. +device uart +device uart_ar71xx +options UART_DEV_TOLERANCE_PCT=50 + +device ar71xx_apb + +device loop +device ether +device md +device bpf +device random +device if_bridge +device gpio +device gpioled Added: head/sys/mips/conf/QCA953X_BASE.hints ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/conf/QCA953X_BASE.hints Wed Nov 18 06:25:25 2015 (r291011) @@ -0,0 +1,75 @@ +# This file (and the kernel config file accompanying it) are not designed +# to be used by themselves. Instead, users of this file should create a +# kernel # config file which includes this file (which gets the basic hints), +# then override the default options (adding devices as needed) and adding +# hints as needed (for example, the GPIO and LAN PHY.) + +# $FreeBSD$ + +hint.apb.0.at="nexus0" +hint.apb.0.irq=4 + +# mdiobus on arge0 - required to bring up arge0 +hint.argemdio.0.at="nexus0" +hint.argemdio.0.maddr=0x19000000 +hint.argemdio.0.msize=0x1000 +hint.argemdio.0.order=0 + +# mdiobus on arge1 - this is what the internal switch is hooked into. +hint.argemdio.1.at="nexus0" +hint.argemdio.1.maddr=0x1a000000 +hint.argemdio.1.msize=0x1000 +hint.argemdio.1.order=0 + +# uart0 +hint.uart.0.at="apb0" +# see atheros/uart_cpu_ar71xx.c why +3 +hint.uart.0.maddr=0x18020003 +hint.uart.0.msize=0x18 +hint.uart.0.irq=3 + +# ehci - on IP3 +hint.ehci.0.at="nexus0" +hint.ehci.0.maddr=0x1b000100 +hint.ehci.0.msize=0x00ffff00 +hint.ehci.0.irq=1 + +hint.arge.0.at="nexus0" +hint.arge.0.maddr=0x19000000 +hint.arge.0.msize=0x1000 +hint.arge.0.irq=2 + +hint.arge.1.at="nexus0" +hint.arge.1.maddr=0x1a000000 +hint.arge.1.msize=0x1000 +hint.arge.1.irq=3 + +# XXX The ath device hangs off of the AHB, rather than the Nexus. +hint.ath.0.at="nexus0" +hint.ath.0.maddr=0x18100000 +hint.ath.0.msize=0x20000 +hint.ath.0.irq=0 +hint.ath.0.vendor_id=0x168c +# XXX for now this is 0x00ff because there's no HAL support +# yet for honeybee. +hint.ath.0.device_id=0x00ff +# Set this to define where the ath calibration data +# should be fetched from in physical memory. +# hint.ath.0.eepromaddr=0x1fff1000 + +# SPI flash +hint.spi.0.at="nexus0" +hint.spi.0.maddr=0x1f000000 +hint.spi.0.msize=0x10 + +hint.mx25l.0.at="spibus0" +hint.mx25l.0.cs=0 + +# Watchdog +hint.ar71xx_wdog.0.at="nexus0" + +# The GPIO function and pin mask is configured per-board +hint.gpio.0.at="apb0" +hint.gpio.0.maddr=0x18040000 +hint.gpio.0.msize=0x1000 +hint.gpio.0.irq=2 _______________________________________________ svn-src-head@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
