what is a polish? The so-called stone polishing is done by removing one or more layers (one to five millimeters).
In the flooring process, the sub-steps of the stone go up to the polishing stage and the unparalleled clarity and glazing that in general, each step is closer to paying for the stone and also more luster. Why should we trim? There are many reasons to make stone stones, but the most important factor is to make a paving stone beautifully executed at high cost, because if the stone that we rugged on the floor of the house, office, factories, shop or ... is done by the sub-decking Do not peel and polish. An unpleasant face is created in the rock, and over time, sediments, dirt and dirt on the rock will increase and create an unnecessary rise. One of the major problems facing the rock is that some people misuse the stone or mosaic to rinse it with chemicals, which causes the deposition of chemicals inside the rock, which in addition to damage to the rock , The colors show it opaque. Also, in most cases, there is an empty space between the rocks, which can also be repaired with a flattening and bonding process, causing the floor to fall over. Separate service makes the cleaning of rocks more difficult نماشویی <http://kafsabizarin.com/%d9%86%d9%85%d8%a7%d8%b4%d9%88%db%8c%db%8c/> کفسابی <http://kafsabizarin.com/%da%a9%d9%81%d8%b3%d8%a7%d8%a8%db%8c-%d9%88-%d8%b3%d9%86%da%af%d8%b3%d8%a7%d8%a8%db%8c/> -- You received this message because you are subscribed to the Google Groups "Swagger" group. To unsubscribe from this group and stop receiving emails from it, send an email to swagger-swaggersocket+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.