Auto=omdemand or auto=start but leaves keyingtries to 0 (infinite) Sent from mobile device
> On Mar 15, 2019, at 09:52, yuryb <[email protected]> wrote: > > Good for you! > I configured L2TP/IPSec tunnel, which should work around the clock. But, when > I come to work in the morning, I find that the tunnel is disconnected. At the > same time, if I run the command "ipsec auto --up myvpn", the connection > restores. > How to automate reconnection using LibreSwan? > > My configuration: > config setup > > virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v4:100.64.0.0/10,%v6:fd00::/8,%v6:fe80::/10 > protostack=netkey > conn myvpn > ikev2=never > type=transport > authby=secret > pfs=no > ike=aes128-sha1-modp1024 > esp=aes128-sha1 > left=%defaultroute > leftprotoport=17/1701 > right=195.149.70.70 > rightprotoport=17/1701 > auto=ondemand > keyingtries=3 > dpddelay=30 > dpdtimeout=120 > dpdaction=clear > rekey=yes > ikelifetime=8h > keylife=1h > > _______________________________________________ > Swan mailing list > [email protected] > https://lists.libreswan.org/mailman/listinfo/swan _______________________________________________ Swan mailing list [email protected] https://lists.libreswan.org/mailman/listinfo/swan
