Fred Gargula wrote: > > Hi, > > I would definitively do it with a Radius server.
I know how to do it with an RADIUS server. It's just that it's somewhat hard to sell a radius server to a client who is buying some components for maybe CHF4k just that a couple of remote places can log in from time to time. -- Andre > Store the user profiles somewhere, and configure the Radius to > attributes the IPs (attributes Framed-IP-Address and Framed-IP-Netmask). > To create the associated route, use the Framed-Route attribute (using > the Framed-IP-Address as a gateway). > > Even if it's for a small amount of users, you'll be happy to be able to > use that on other purposes, setting it up easily (basically just aaa > radius authentication config in the cisco) > > If you intend to store the users profile in LDAP, then I have a radiator > config which does the job. > Just let me know if you're interested in more details. This setup is > quite quick to install. > > Fred > > Viktor Steinmann wrote: > > >Ummm.... I had a similar problem about 2 weeks ago and was also looking for > >exactly the same thing - I gave up after 4 hours of googling, reading cisco > >docs and trying to create some nasty hack with policy-based-routing... > > > >Only radius-attributes did the trick... but if you find out something else, > >I'd be interested in the results, too :-) > > > >Viktor > > > >On Thursday 27 March 2003 01:17, Andre Oppermann wrote: > > > > > >>Hello, > >> > >>I've got a little Cisco problem. There is a 2600 router with two > >>BRI interfaces and there are a couple of other routers out there > >>periodically connecting to it. I'm using virtual-templates to allow > >>for mppp channel bundling. So the interface is alway changing. > >>Sometimes this user has got vi2, the other time vi3 and so on. > >>Putting a static route route with "ip route blabla" is not an > >>option. > >> > >>Now the problem is how can I associate a separate static route (ie. > >>192.168.40/24 and so on) to the "users" that connect to the 2600? > >> > >>I've been searching the Cisco website for documentation all night > >>and can't find a useful solution other than putting a RADIUS or > >>TACACS server in place to handle the routes. > >> > >>Is there any way to bond a static route to a given user thats > >>connects to the machine in a way that can be done entirely local > >>on the router? The IOS I have on it is 12.2.T13(3). > >> > >> > >---------------------------------------------- > >[EMAIL PROTECTED] Maillist-Archive: > >http://www.mail-archive.com/swinog%40swinog.ch/ > > > > > > ---------------------------------------------- > [EMAIL PROTECTED] Maillist-Archive: > http://www.mail-archive.com/swinog%40swinog.ch/ ---------------------------------------------- [EMAIL PROTECTED] Maillist-Archive: http://www.mail-archive.com/swinog%40swinog.ch/