no, GBIC configuration is easy. No special commands, auto negotiation... Did you see any messages within the log buffer?
> -----Original Message----- > From: Patrick Studer [mailto:[EMAIL PROTECTED] > Sent: Friday, October 10, 2003 5:29 PM > To: [EMAIL PROTECTED] > Subject: AW: [swinog] VLAN Problems > > Hi Pascal > > The configuration is as you proposed. We update the > ios of the switches to the latest version. Before the > two switches had two different version. Is there anything > special to configure for the gbic GE interface? > > Regards > > Patrick > > -------------------------------------------------- > Magnet.ch AG > G�terstrasse 86 > CH-4053 Basel > Tel. 0842 420 420 > Fax. 0842 420 422 > Email: [EMAIL PROTECTED] > WWW: http://www.magnet.ch > --------------------------------------------------- > Magnet.ch AG - Ihr unabh�ngiger Internet Provider > --------------------------------------------------- > > > > -----Urspr�ngliche Nachricht----- > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Auftrag von Pascal Gloor > Gesendet: Freitag, 10. Oktober 2003 17:21 > An: [EMAIL PROTECTED] > Betreff: Re: [swinog] VLAN Problems > > > > Does anyone have an idea what could be the reason for > > the following problem. We have to catalysts (3550 one > > with EMI and one with SMI software). They are link > > with GBIC GE Interface. From the 3550 with EMI Software > > is a trunk configured to 7200 Router. We have configured > > the VLANs on the 3550 with EMI Software. The problem now > > is, that the second 3550 sometime lose the connection to > > the first 3550. There are no Interface Error on GBIC > > Interface. Here a litte schema of the current config: > > The first thing which pops up in my mind is, VTP... > > switch1# vlan database > switch1(vlan)# vtp server > switch1(vlan)# apply > switch1(vlan)# exit > > switch2# vlan database > switch2(vlan)# vtp client > switch2(vlan)# apply > switch2(vlan)# exit > > After that you can define all the vlans. > > switch1# vlan database > switch1(vlan)# vlan <number> name <give it some cool name> > switch1(vlan)# vlan <number> name <give it some cool name> > .... > switch1(vlan)# apply > switch1(vlan)# exit > > > > Pascal > ---------------------------------------------- > [EMAIL PROTECTED] Maillist-Archive: > http://www.mail-archive.com/swinog%40swinog.ch/ > > > > ---------------------------------------------- > [EMAIL PROTECTED] Maillist-Archive: > http://www.mail-archive.com/swinog%40swinog.ch/ > ---------------------------------------------- [EMAIL PROTECTED] Maillist-Archive: http://www.mail-archive.com/swinog%40swinog.ch/
