The bandwidth points of the PA-GE is 400 so you can use it on a NPE300 (600 pts/bus max) without problem, also in slot 1 or 3 if the I/O card have only 1 FE (200 pts). It's not a problem of bandwidth points.
But, cisco doc say with any NPE (from NPE-300 and after, including the G1) the PA-GE card is limited to 400Mbps throughput ; http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_sheet09186a0080091ce7.html See table#3. I would like to know if any of you already tested a PA-GE with higher throughput ? Thx :) Jerome > -----Message d'origine----- > De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de > Marcel Stutz > Envoy� : mercredi, 20. octobre 2004 17:35 > � : [EMAIL PROTECTED] > Objet : AW: [swinog] PA-GE on 7200VXR platform > > > Hi Jermoe, > > Yes you have a summary of Points and the PA-GE Points are higher > then each NPE Processor Module/PCI Bus can be support except the NPE-G1. > Thats why the PA-GE is limited to 400Mbps > > As Info Slot 0 / 1 / 3 and 5 are on the SAME PCI Bus and 2 / 4 and 6 on the other > From the Preformance view it's better to out the PA-GE on 2 4 or 6 without any > Other Module. > > With a NPE-GE1 you can use each PCI Bus/Slot with the Full Speed on the VXR Chassie. > > Mit freundlichen Gr�ssen > > Marcel Stutz > Netzwerk & Unix Administrator > > ------------------------------------------------------------------ > | > Genotec Internet Consulting AG | E-Mail : [EMAIL PROTECTED] > Hegenheimermattweg 119a | Website : http://www.genotec.ch > CH - 4123 Allschwil | -------------------------------- > Schweiz | > | Zentrale: +41 61 487 99 99 > ------------------------------- | Fax : +41 61 487 99 98 > | Support : 0848 321 123 > easy[hosting] | > 500 MB, unl.Pointings, | -------------------------------- > Subdomains und E-mails, | Supportanfragen bitte immer an > Internetzugang und mehr | [EMAIL PROTECTED] > SFr. 150/Jahr | Web: http://support.genotec.ch > | > ------------------------------------------------------------------ > > -----Urspr�ngliche Nachricht----- > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Jerome Tissieres > Gesendet: Mittwoch, 20. Oktober 2004 17:26 > An: Swinog > Betreff: [swinog] PA-GE on 7200VXR platform > > Hi all, > > Does anybody use PA-GE cards on VXR platform ? > (not the NPE-G1 inf, a "real" PA-GE) > > I saw in a Cisco doc they are limited up to 400Mbps... is that true ? > > > Thanks, > Jerome > > > _______________________________________________ > swinog mailing list > [EMAIL PROTECTED] > http://lists.init7.net/cgi-bin/mailman/listinfo/swinog > > > > _______________________________________________ > swinog mailing list > [EMAIL PROTECTED] > http://lists.init7.net/cgi-bin/mailman/listinfo/swinog _______________________________________________ swinog mailing list [EMAIL PROTECTED] http://lists.init7.net/cgi-bin/mailman/listinfo/swinog
