I found this descriptor of the Phoenix wifi radio on 
LinuxDevices.com.  It's a bit dated but speaks to the use of Linux in 
combination with an Intel processor and spoke prospectively about the 
Phoenix being launched in the U.S. consumer market.  That has 
happened, as have the added capabilities spoken of in the article.  
Furthermore, the ability to "read" Realaudio streaming has been added 
as well.  The Phoenix still reads only http-based streams, but a 
representative of the company has told me that they are working on 
expanding that to rtsp:// files.

John Figliozzi
Halfmoon, NY
--------------

Device Profile: Com One Phoenix IP Radio
(Feb. 16, 2007)

French bluetooth accessory specialist Com One is readying a portable 
WiFi clock-radio powered by a 2.6.15-7 kernel and the Familiar Linux 
distribution. The battery-powered "Phoenix IP Radio" is based on an 
Intel PXA270 (Bulverde) processor, and goes on sale direct to 
consumers next month.

The Phoenix can receive and play media from HTTP-based Internet radio 
stream protocols that include ICEcast/SHOUTcast and Microsoft Media 
Streaming Protocol (MSP). Additionally, the device can render audio 
content stored on attached USB storage devices and portable media 
players. 

Supported playlist formats include standard M3U and PLS, as well as 
Microsoft's ASX format. Additionally, the radio can handle RSS feeds, 
such as those associated with podcasts. Supported audio file formats 
include WMA-8 and -9, and MP3, at bitrates up to 320Kbps. Uncompressed 
WAV files up to DAT (48kHz) quality are also supported. 

Previously, the device was marketed primarily to network service 
providers such as Orange, a large French mobile phone carrier and 
Internet service provider, which resold a white version of the device 
as the "Orange LiveRadio." Now, Com One (also known as "Baracoda") is 
establishing a retail channel for the device in North America, and 
also plans to sell direct to consumers via the Internet, starting in 
March, according to MARCOM specialist Marcia Simon. 

Com One is best known for Bluetooth accessories such as headphones and 
wireless speakers. The Phoenix IP Radio, which has a WEP/WPA-capable 
802.11b/g WiFi transceiver, is the company's first WiFi product, 
according to Simon. "The direction the consumer market is going, it 
just made sense to branch out into WiFi," she said, adding that the 
Phoenix does support USB Bluetooth adapters, and that a future model 
will have Bluetooth built in.

Thanks to its legacy as CPE (customer premises equipment), the Phoenix 
has several features aimed at integration with service and management 
platforms. These features may or may not be present in the consumer 
model. They include browser-based user customization, over-the-air 
firmware updates, integration with indexing/sales services for audio 
book, podcasts, and Internet streams. Additionally, the can be 
integrated with billing and customer relationship management services. 

What's under the hood?

The Phoenix radio is based on an Intel PXA270 processor clocked at 
300MHz. It boots Linux from 8MB of Flash, and has 32MB of RAM. As 
noted, the device offers two I/O interfaces -- 802.11b/g, and a USB 
host port supporting USB mass storage devices and USB Bluetooth 
transceivers. Plus it has a 128x64 pixel monochromatic LCD screen.

The device's audio subsystem includes a dual 2 Watt stereo amplifier, 
and a pair of 1.6-inch (4cm), 8-ohm speakers rated to 4 Watts (RMS) 
each. The unit also has an 1/8th-inch (3.5mm) stereo mini jack. Audio 
system bandwidth is claimed to be 170Hz to 20kHz, an impressive range 
for such a small, low-powered device.

Hardware controls include eight preset keys, a 5-way navigation pad, a 
selection key, a home key, and a volume knob.

The Phoenix is powered by and supplied with four rechargeable (NiMH) 
AA batteries, and also comes with a region-specific power 
adapter/recharger. It measures 8.7 x 4.8 x 3 inches (220 x 123 x 
78mm), and weighs 1 pound, 4.5 ounces (0.6kg) with batteries. 

Why Linux?

CTO and co-founder Olivier Giroud said his company chose Linux for 
its "open environment" and for its "many available open-source 
libraries." The company's internal staff were able to build the 
Phoenix's Linux-based operating system without outside assistance, he 
said. 

Asked about the challenges of developing embedded products with Linux, 
Giroud stated, "The code is not small enough. It has to be optimized."

Availability

Com One expects to begin accepting orders for the Phoenix IP Radio in 
March, for delivery in April. Suggested retail for the device is $250. 


_______________________________________________
Swprograms mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/swprograms

To unsubscribe:  Send an E-mail to  [EMAIL PROTECTED], or visit the URL shown 
above.

Reply via email to