diff /tmp/before /tmp/after 78c78,90 < T: Bus=05 Lev=03 Prnt=05 Port=03 Cnt=02 Dev#= 8 Spd=12 MxCh= 0 --- > T: Bus=05 Lev=03 Prnt=05 Port=02 Cnt=02 Dev#= 11 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=16 #Cfgs= 2 > P: Vendor=03f0 ProdID=1016 Rev= 0.00 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ipaq > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > C: #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver= > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > T: Bus=05 Lev=03 Prnt=05 Port=03 Cnt=03 Dev#= 8 Spd=12 MxCh= 0
The information you requested are: iPAQ 3715rx I am sorry to report that this doesn't seem to work (might as well be my fault). synce-pstatus does exit with "synce-pstatus: Could not find configuration at path '(Default)'". Neighter Multisync nor Evolution Sync Plugin can communicate with the device. regards destin ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ SynCE-Devel mailing list SynCE-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
