Hi,
I got a Driver=none when tryed to sync my rx3115 to Fedora 6. These are the
outputs:
[EMAIL PROTECTED] pavolo]# diff /tmp/before /tmp/after
32a33,40
> T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=16 #Cfgs= 1
> P: Vendor=03f0 ProdID=1016 Rev= 0.00
> C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[EMAIL PROTECTED] pavolo]# uname -r
2.6.22.5-49.fc6
Device is a HP rx3115
Thanks!,
Giovanni P.
____________________________________________________________________________________
Need a vacation? Get great deals
to amazing places on Yahoo! Travel.
http://travel.yahoo.com/
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
SynCE-Devel mailing list
SynCE-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/synce-devel
