On Sun, 2007-09-16 at 07:46 -0700, Giovanni Pavolini wrote: > Hi, > I got a Driver=none when tryed to sync my rx3115 to Fedora 6. These are the > outputs: > > > > [EMAIL PROTECTED] pavolo]# diff /tmp/before /tmp/after > 32a33,40 > > T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 > > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=16 #Cfgs= 1 > > P: Vendor=03f0 ProdID=1016 Rev= 0.00 > > C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA > > I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > [EMAIL PROTECTED] pavolo]# uname -r > 2.6.22.5-49.fc6 > > Device is a HP rx3115
What does it say after a "modprobe ipaq"? \David -- ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ SynCE-Devel mailing list SynCE-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
