Hi,
Adam Stirk wrote:
Rene,
This patch for the udev appears to be working. Just the init scripts need
looking at to use udevadm so that the compatibility patch can be removed in the
future.
I would like to keep the compat patch as long as possible to avoid
breaking installed systems in the field, which would stop booting
without a carefully interlocked update of the initrd etc.
Regards
Adam
-----Original Message-----
From: Adam Stirk [mailto:[EMAIL PROTECTED]
Sent: 04 November 2008 20:38
To: Michael Tross
Cc: T2 developers mailing list
Subject: Re: [t2] udev
I have tested udev v130 with a clean build and my system is working
fine.
I have attached a new diff file with my small change to the .conf file
to include all the extras which gives me the persistent NIC names that I
need.
Adam
-----Original Message-----
From: Adam Stirk [mailto:[EMAIL PROTECTED]
Sent: 03 November 2008 09:56
To: Michael Tross
Cc: T2 developers mailing list
Subject: Re: [t2] udev
I shall install the build tonight, I just didn't want to break my system
too much.
Adam
-----Original Message-----
From: Michael Tross [mailto:[EMAIL PROTECTED]
Sent: 03 November 2008 08:35
To: Adam Stirk
Cc: T2 developers mailing list
Subject: RE: [t2] udev
Hi,
Am Sonntag, den 02.11.2008, 21:34 +0000 schrieb Adam Stirk:
Hi,
I have found a problem with the rules in v130 (without testing) the
rules are now being installed to /lib/udev/rules.d instead of
/etc/udev/rules.d
this is right, but intentional by the udev authors, introduced in
udev-125:
http://marc.info/?l=linux-hotplug&m=121662743129837&w=2
They split the rules folder into three:
/lib/udev/rules.d/ - default installed rules
/etc/udev/rules.d/ - user rules + on-the-fly generated rules
/dev/.udev/rules.d/ - temporary non-persistent rules created after
bootup
The udev default rules are installed below /lib now, and the T2 rules
are placed in /etc/udev/rules.d like before.
Michael
--
René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
http://exactcode.de | http://t2-project.org | http://rene.rebe.name
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[EMAIL PROTECTED] with a subject of: unsubscribe t2
