Hi René,
I reported problems with dietlb in a post before. So I disabled this packages:
> O dietlibc
> O embutils
I try to get it run on a cheep Chinese 7" ePad. Debian is already
running, but only with a Android Kernel. There is a Built in WM8505
with arm926ej core. The Manufacturer WonderMedia has opend the Kernel
Source: http://github.com/projectgus/kernel_wm8505 , but there's a lot
of horrible code in
the WMT source release. So I decide to build it from scratch......
I never set up a board config! Please, can you provide me with Information?
ToM
Hi,
this is the mkinitrd failing to copy some statically compiled tools
into the initrd image, guess you disabled some packages or so. You
certainly will have to setup some board config in any case for a
matching kernel for your board.
What kind of ARM board / platform are you using?
René
On Sep 21, 2010, at 9:27 PM, [email protected] wrote:
== 19:02:51 =[1]=> Building base/linux26 [2.6.35.5 9.0-trunk].
-> Parallel build using 2 jobs enabled.
-> Reading build/.../tools.cross/lib/pkg_linux26_pre.conf
-> Including UnionFS patch ...
-> Reading package config: package/base/linux26/linux26.conf
-> Reading build/.../tools.cross/lib/pkg_linux26_post.conf
-> Preparing build in src.linux26.armel.20100921.190250.14171.localhost
-> Building. Writing output to $root/var/adm/logs/1-linux26.out
*> The use of custmain is deprecated, please use hooks instead.
!> cp: cannot stat
`/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/sleep': No such file or dire
..
!> cp: cannot stat
`/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/losetup': No such file or di
..
!> cp: cannot stat
`/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/chmod': No such file or dire
..
!> cp: cannot stat
`/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/cat': No such file or direct
..
!> cp: cannot stat
`/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/mknod': No such file or dire
..
!> cp: cannot stat
`/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/dmesg': No such file or dire
..
!> Due to previous errors, no 1-linux26.log file!
!> (Try enabling xtrace in the config to track an error inside the
build system.)
-> $root/var/adm/logs/1-linux26.out -> 1-linux26.err
== 09/21/10 19:07:19 =[1]=> Aborted building package linux26.
--
GMX DSL SOMMER-SPECIAL: Surf & Phone Flat 16.000 für nur 19,99 Euro/mtl.!*
http://portal.gmx.net/de/go/dsl
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
--
René Rebe, ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin
http://exactcode.com | http://t2-project.org | http://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
