Hi again,
got that covered, too:
Committed revision 37655.
René
On Sep 22, 2010, at 2:27 PM, Rene Rebe wrote:
> Hi,
>
> well, I went thru it and added some basic fixup for dietlibc/arm/eabi. Most
> of the tools for the initrd that we statically link against dietlibc by
> default do build, now.
>
> Committed revision 37654.
>
> AFAIC for most part only the pdksh is missing. Maybe I get to it later, ...
>
> René
>
> On Sep 22, 2010, at 12:20 PM, Rene Rebe wrote:
>
>> Hi,
>>
>> I just took a look on this dietlibc/arm build error. The issue is that we
>> default to the new EABI for some time, and for this some syscalls are no
>> longer available, such as time, ... dietlibc would need a patch or two to
>> correctly wire them up to new syscalls, such as gettimeofday, etc, ...
>>
>> dietlibc/arm/syscalls.h:
>>
>> #if defined(__ARM_EABI__) && !defined(__KERNEL__)
>> #undef __NR_time
>> #undef __NR_umount
>> #undef __NR_stime
>> #undef __NR_alarm
>> ...
>>
>> Patches welcome, otherwise I can try to find the time to implement this.
>>
>> Regards,
>> René
>>
>> On Sep 22, 2010, at 10:52 AM, ToM wrote:
>>
>>> Hi René,
>>>
>>> I reported problems with dietlb in a post before. So I disabled this
>>> packages:
>>>> O dietlibc
>>>> O embutils
>>>
>>> I try to get it run on a cheep Chinese 7" ePad. Debian is already running,
>>> but only with a Android Kernel. There is a Built in WM8505 with arm926ej
>>> core. The Manufacturer WonderMedia has opend the Kernel Source:
>>> http://github.com/projectgus/kernel_wm8505 , but there's a lot of horrible
>>> code in
>>> the WMT source release. So I decide to build it from scratch......
>>>
>>> I never set up a board config! Please, can you provide me with Information?
>>>
>>> ToM
>>>
>>>
>>>
>>>> Hi,
>>>>
>>>> this is the mkinitrd failing to copy some statically compiled tools into
>>>> the initrd image, guess you disabled some packages or so. You certainly
>>>> will have to setup some board config in any case for a matching kernel
>>>> for your board.
>>>>
>>>> What kind of ARM board / platform are you using?
>>>>
>>>> René
>>>>
>>>> On Sep 21, 2010, at 9:27 PM, [email protected] wrote:
>>>>
>>>>>
>>>>>
>>>>>
>>>>> == 19:02:51 =[1]=> Building base/linux26 [2.6.35.5 9.0-trunk].
>>>>> -> Parallel build using 2 jobs enabled.
>>>>> -> Reading build/.../tools.cross/lib/pkg_linux26_pre.conf
>>>>> -> Including UnionFS patch ...
>>>>> -> Reading package config: package/base/linux26/linux26.conf
>>>>> -> Reading build/.../tools.cross/lib/pkg_linux26_post.conf
>>>>> -> Preparing build in src.linux26.armel.20100921.190250.14171.localhost
>>>>> -> Building. Writing output to $root/var/adm/logs/1-linux26.out
>>>>> *> The use of custmain is deprecated, please use hooks instead.
>>>>> !> cp: cannot stat
>>>>> `/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/sleep':
>>>>> No such file or dire ..
>>>>> !> cp: cannot stat
>>>>> `/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/losetup':
>>>>> No such file or di ..
>>>>> !> cp: cannot stat
>>>>> `/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/chmod':
>>>>> No such file or dire ..
>>>>> !> cp: cannot stat
>>>>> `/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/cat':
>>>>> No such file or direct ..
>>>>> !> cp: cannot stat
>>>>> `/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/mknod':
>>>>> No such file or dire ..
>>>>> !> cp: cannot stat
>>>>> `/root/svn-t2-trunk/t2-trunk/build/armel-9.0-trunk-generic-arm-gnueabi-arm926ej-s-cross-linux/usr/embutils/dmesg':
>>>>> No such file or dire ..
>>>>> !> Due to previous errors, no 1-linux26.log file!
>>>>> !> (Try enabling xtrace in the config to track an error inside the build
>>>>> system.)
>>>>> -> $root/var/adm/logs/1-linux26.out -> 1-linux26.err
>>>>> == 09/21/10 19:07:19 =[1]=> Aborted building package linux26.
>>>>>
>>>>> --
>>>>> GMX DSL SOMMER-SPECIAL: Surf & Phone Flat 16.000 für nur 19,99 Euro/mtl.!*
>>>>> http://portal.gmx.net/de/go/dsl
>>>>>
>>>>>
>>>>>
>>>>> -----------------------------------------------------------
>>>>> If you wish to unsubscribe from this mailing, send mail to
>>>>> [email protected] with a subject of: unsubscribe t2
>>>>
>>>> --
>>>> René Rebe, ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin
>>>> http://exactcode.com | http://t2-project.org | http://rene.rebe.de
>>>>
>>>>
>>>
>>>
>>
>> --
>> René Rebe, ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin
>> http://exactcode.com | http://t2-project.org | http://rene.rebe.de
>>
>
> --
> René Rebe, ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin
> DE Legal: Amtsgericht Charlottenburg HRB 105123B, Tax-ID#: DE251602478
> Managing Directors: Susanne Klaus, René Rebe
> http://exactcode.com | http://t2-project.org | http://rene.rebe.de
>
> -----------------------------------------------------------
> If you wish to unsubscribe from this mailing, send mail to
> [email protected] with a subject of: unsubscribe t2
--
René Rebe, ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin
DE Legal: Amtsgericht Charlottenburg HRB 105123B, Tax-ID#: DE251602478
Managing Directors: Susanne Klaus, René Rebe
http://exactcode.com | http://t2-project.org | http://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
