Hi,
yes, I know this fix-clean-build cycles. When I was still at university I often
did so at ROCK/T2 times for a week. Even configured the build abort to beep and
wake me up at night, …
I just double checked, linux-3.11.x does update in an otherwise working VM does
not boot with the same error in my test VM, … There must be something out of
sync regarding kernel config and initrd.
Greetings,
René
On Oct 14, 2013, at 11:56 , [email protected] wrote:
> Hi Rene,
>
> i collected all the patches i applied over the last week and i will write
> a new doc on how to get up from 8.0 to 9.0 in 83 "easy" steps. I was just
> blowing some steam.... sorry. i know how much work you put in... but last
> days were filled with fix clean -cache -build and restart over and over to
> get all right. I was really hoping to see that T2 booting tonight....
>
>
>
>
>> Hi Iulian,
>>
>> yes, so am I after over a decade in the open source world. Things are
>> broken rather more often than not, and than people can catch up to fix it
>> :-/
>>
>> I will take a look as well, I noticed I also got this kind of failure with
>> an in-system kernel update, so it looks something changed with the kernel
>> and/or config (that is maybe some new config option is not set as
>> necessary for the initrd stuff, …).
>>
>> Btw, from the change-log it should be obvious how much work I personally
>> spent with T2:
>>
>> http://svn.exactcode.de/ChangeLog-t2
>>
>> I would really appreciate if others would contribute their changes and
>> patches more often to keep things working more smoothly.
>>
>> Greetings,
>> René
>>
>> On Oct 14, 2013, at 11:27 , [email protected] wrote:
>>
>>> Well,
>>>
>>> after almost a week of tinkering day and night with packages that refuse
>>> to update i managed to compile a basic version. Unfortunately it does
>>> not
>>> boot. i get Failed to execute /init
>>>
>>> /bin/sh No Controlling TTY (open /dev/tty: no such file or directory)
>>>
>>> kernel is 3.10.12-dist and initrd appears to be correct.
>>>
>>> i am really dissapointed.
>>>
>>>
>>>
>>>> well i'm trying for the last two days to build a workable from t2 8.0
>>>> iso
>>>> to no avail. Downgraded some packages, tweaked some others but still
>>>> cannot build. Thank you for your efforts. i will continue trying to
>>>> build
>>>> since i have a big project based on this. Of course i will post my
>>>> diffs
>>>> and tweaks and possible a new manual if i have time.
>>>>
>>>> Regards,
>>>>
>>>> Iulian
>>>>
>>>>
>>>>> hi,
>>>>> i now try an build an 64bit live iso on current trunk.
>>>>> If build fine and boot i share the iso.
>>>>>
>>>>>
>>>>> 2013/10/3 <[email protected]>
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> the current t2 live CD is still at version 8. I think it would
>>>>>> benefit
>>>>>> to
>>>>>> build a new CD image starting from 9.0 and put it on download. It was
>>>>>> hard
>>>>>> enough to build t2 from it last year, now it became harder.
>>>>>>
>>>>>> Thank you,
>>>>>>
>>>>>> Iulian
>>>>>>
>>>>>>
>>>>>> -----------------------------------------------------------
>>>>>> If you wish to unsubscribe from this mailing, send mail to
>>>>>> [email protected] with a subject of: unsubscribe t2
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>> --
>> http://exactcode.com | http://exactscan.com | http://ocrkit.com |
>> http://t2-project.org | http://rene.rebe.de
>>
>>
>
--
ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin
DE Legal: Amtsgericht Berlin (Charlottenburg) HRB 105123B, Tax-ID#: DE251602478
Managing Director: René Rebe
http://exactcode.com | http://exactscan.com | http://ocrkit.com |
http://t2-project.org | http://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
