Hi Rene, Which was the last working kernel? regards,
Iulian > Hi, > > yes, I know this fix-clean-build cycles. When I was still at university I > often did so at ROCK/T2 times for a week. Even configured the build abort > to beep and wake me up at night, > > I just double checked, linux-3.11.x does update in an otherwise working VM > does not boot with the same error in my test VM, There must be something > out of sync regarding kernel config and initrd. > > Greetings, > René > > On Oct 14, 2013, at 11:56 , [email protected] wrote: > >> Hi Rene, >> >> i collected all the patches i applied over the last week and i will >> write >> a new doc on how to get up from 8.0 to 9.0 in 83 "easy" steps. I was >> just >> blowing some steam.... sorry. i know how much work you put in... but >> last >> days were filled with fix clean -cache -build and restart over and over >> to >> get all right. I was really hoping to see that T2 booting tonight.... >> >> >> >> >>> Hi Iulian, >>> >>> yes, so am I after over a decade in the open source world. Things are >>> broken rather more often than not, and than people can catch up to fix >>> it >>> :-/ >>> >>> I will take a look as well, I noticed I also got this kind of failure >>> with >>> an in-system kernel update, so it looks something changed with the >>> kernel >>> and/or config (that is maybe some new config option is not set as >>> necessary for the initrd stuff, ). >>> >>> Btw, from the change-log it should be obvious how much work I >>> personally >>> spent with T2: >>> >>> http://svn.exactcode.de/ChangeLog-t2 >>> >>> I would really appreciate if others would contribute their changes and >>> patches more often to keep things working more smoothly. >>> >>> Greetings, >>> René >>> >>> On Oct 14, 2013, at 11:27 , [email protected] wrote: >>> >>>> Well, >>>> >>>> after almost a week of tinkering day and night with packages that >>>> refuse >>>> to update i managed to compile a basic version. Unfortunately it does >>>> not >>>> boot. i get Failed to execute /init >>>> >>>> /bin/sh No Controlling TTY (open /dev/tty: no such file or directory) >>>> >>>> kernel is 3.10.12-dist and initrd appears to be correct. >>>> >>>> i am really dissapointed. >>>> >>>> >>>> >>>>> well i'm trying for the last two days to build a workable from t2 8.0 >>>>> iso >>>>> to no avail. Downgraded some packages, tweaked some others but still >>>>> cannot build. Thank you for your efforts. i will continue trying to >>>>> build >>>>> since i have a big project based on this. Of course i will post my >>>>> diffs >>>>> and tweaks and possible a new manual if i have time. >>>>> >>>>> Regards, >>>>> >>>>> Iulian >>>>> >>>>> >>>>>> hi, >>>>>> i now try an build an 64bit live iso on current trunk. >>>>>> If build fine and boot i share the iso. >>>>>> >>>>>> >>>>>> 2013/10/3 <[email protected]> >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> the current t2 live CD is still at version 8. I think it would >>>>>>> benefit >>>>>>> to >>>>>>> build a new CD image starting from 9.0 and put it on download. It >>>>>>> was >>>>>>> hard >>>>>>> enough to build t2 from it last year, now it became harder. >>>>>>> >>>>>>> Thank you, >>>>>>> >>>>>>> Iulian >>>>>>> >>>>>>> >>>>>>> ----------------------------------------------------------- >>>>>>> If you wish to unsubscribe from this mailing, send mail to >>>>>>> [email protected] with a subject of: unsubscribe t2 >>>>>>> >>>>>>> >>>>>> >>>>> >>>>> >>>> >>> >>> -- >>> http://exactcode.com | http://exactscan.com | http://ocrkit.com | >>> http://t2-project.org | http://rene.rebe.de >>> >>> >> > > -- > ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin > DE Legal: Amtsgericht Berlin (Charlottenburg) HRB 105123B, Tax-ID#: > DE251602478 > Managing Director: René Rebe > http://exactcode.com | http://exactscan.com | http://ocrkit.com | > http://t2-project.org | http://rene.rebe.de > >
----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
