Hi, looks like Gerardo Di Iorio broke that in June, ieek :-/ - he already committed your fix in r42121.
What is wrong with our u/dev rules? As far as I remember the default rules (years ago) where very verbose and created all kinds of random compat stuff and whatnot all over. I would prefer keeping the default rules minimal, lean and clean. On Oct 21, 2013, at 10:33 , [email protected] wrote: > Hi all, > > managed to make current udev to work and boot from CD and stuff. THere are > two issues that has to be fixed. > > No 1: > in package configuration file ( trunk/package/filesystem/udev/udev.conf) > there is the line : var_append confopt " " "--libexecdir=/lib udev/" # > $libdir? > > change the line to be : var_append confopt " " "--libexecdir=/lib/udev/" # > $libdir? ( aka remove the dam space from between the udev and lib. This > will cause all the udev rules to be written where they should be not in > /lib/rules.d. > > > No2: > > go into downloads, (trunk/download/mirror/u/) unpack the udev-167.tar.bz2 > and copy al the rules from /udev/rules/rules.d into package config folder > ( from udev-167/rules/rules.d to /trunk/package/filesystem/udev) > > this will cause all valid rules of udev to be written into > /etc/udev/rules.d and also into initrd image when this image is built. > Witout these rules the installer cannot find stage 2 because there are no > rules to describe the devices and map corresponding things into /dev > before 2nd stage can be loaded. > > > there are still some minor messages on the console after 2nd stage loads > but i will fix them ( or at least try to) > > > now clean all the stuff from cache and build and put your CPU's to rebuild > the distro. It will build and install. > > cheers, > > Iulian > > -- ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin DE Legal: Amtsgericht Berlin (Charlottenburg) HRB 105123B, Tax-ID#: DE251602478 Managing Director: René Rebe http://exactcode.com | http://exactscan.com | http://ocrkit.com | http://t2-project.org | http://rene.rebe.de
----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
