Hi, what exactly changed? Format totally different, or just "some rule" to make some kernel module load or vital device node to appear?
On Oct 22, 2013, at 22:42 , [email protected] wrote: > Hi, > > i would love to keep them at minimum but the new udev loves to have them > in place even in initrd otherwise it will not boot correctly from CD. i > will do further tests to minimize packages but for now that is my > recommendation. > > Regards, > > Iulian > > >> Hi, >> >> looks like Gerardo Di Iorio broke that in June, ieek :-/ - he already >> committed your fix in r42121. >> >> What is wrong with our u/dev rules? As far as I remember the default rules >> (years ago) where very verbose and created all kinds of random compat >> stuff and whatnot all over. I would prefer keeping the default rules >> minimal, lean and clean. >> >> On Oct 21, 2013, at 10:33 , [email protected] wrote: >> >>> Hi all, >>> >>> managed to make current udev to work and boot from CD and stuff. THere >>> are >>> two issues that has to be fixed. >>> >>> No 1: >>> in package configuration file ( trunk/package/filesystem/udev/udev.conf) >>> there is the line : var_append confopt " " "--libexecdir=/lib udev/" # >>> $libdir? >>> >>> change the line to be : var_append confopt " " "--libexecdir=/lib/udev/" >>> # >>> $libdir? ( aka remove the dam space from between the udev and lib. This >>> will cause all the udev rules to be written where they should be not in >>> /lib/rules.d. >>> >>> >>> No2: >>> >>> go into downloads, (trunk/download/mirror/u/) unpack the >>> udev-167.tar.bz2 >>> and copy al the rules from /udev/rules/rules.d into package config >>> folder >>> ( from udev-167/rules/rules.d to /trunk/package/filesystem/udev) >>> >>> this will cause all valid rules of udev to be written into >>> /etc/udev/rules.d and also into initrd image when this image is built. >>> Witout these rules the installer cannot find stage 2 because there are >>> no >>> rules to describe the devices and map corresponding things into /dev >>> before 2nd stage can be loaded. >>> >>> >>> there are still some minor messages on the console after 2nd stage loads >>> but i will fix them ( or at least try to) >>> >>> >>> now clean all the stuff from cache and build and put your CPU's to >>> rebuild >>> the distro. It will build and install. >>> >>> cheers, >>> >>> Iulian >>> >>> >> >> -- >> ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin >> DE Legal: Amtsgericht Berlin (Charlottenburg) HRB 105123B, Tax-ID#: >> DE251602478 >> Managing Director: René Rebe >> http://exactcode.com | http://exactscan.com | http://ocrkit.com | >> http://t2-project.org | http://rene.rebe.de >> >> > -- ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin DE Legal: Amtsgericht Berlin (Charlottenburg) HRB 105123B, Tax-ID#: DE251602478 Managing Director: René Rebe http://exactcode.com | http://exactscan.com | http://ocrkit.com | http://t2-project.org | http://rene.rebe.de
----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
