Hi,
so some well over 4 years later I finally fixed this (simply did not update
bash since then ;-)
Better late then never, was a super trivial bash workaround / bug or standard
compatibility issue:
svn di -c r48257
René
On 13 Oct 2014, at 19:20, ExactCODE <[email protected]> wrote:
> Still fails.
>
> Emerged bash into the host system, re-run Config, and Build-Target
>
> 0-binutils failed, wrapper environments et al. empty:
>
> == 15:50:58 =[0]=> Building develop/binutils [2.24 9.0-trunk].
> -> Parallel build using 4 jobs enabled.
> -> Reading package config: package/develop/binutils/binutils.conf
> -> Preparing build in
> src.binutils.reference64.20141013.155057.4649.builder.exactcode.de
> -> Building. Writing output to $root/var/adm/logs/0-binutils.out
> !> bfd_set_section_userdata (stdoutput, secptr, seginfo);
> !> ^
> !> mv -f .deps/stabs.Tpo .deps/stabs.Po
> !> cc1: all warnings being treated as errors
> !> mv -f .deps/symbols.Tpo .deps/symbols.Po
> !> mv -f .deps/read.Tpo .deps/read.Po
> !> Due to previous errors, no 0-binutils.log file!
> !> (Try enabling xtrace in the config to track an error inside the build
> system.)
> == 10/13/14 15:51:37 =[0]=> Aborted building package binutils.
>
> build/reference64-9.0-trunk-reference-x86-64-westmere-linux/var/adm/logs/0-binutils.err
>
>
> Command Wrapper Debug: running 'gcc --version' ..
> gcc is
> /usr/src/t2-trunk/build/reference64-9.0-trunk-reference-x86-64-westmere-linux/TOOLCHAIN/tools.cross/wrapper/gcc
> Old Command: gcc --version
> ENVPREFIX = 'CMD'
> OTHERS = ''
> INSERT = ''
> REMOVE = ''
> APPEND = ''
> FILTER = ''
>
>
> On Oct 13, 2014, at 16:36, Toan Pham <[email protected]> wrote:
>
>>
>> yeah, typo.
>>
>> sorry
>
> --
> ExactCODE GmbH, Lietzenburger Str. 42, DE-10117 Berlin
> DE Legal: Amtsgericht Berlin (Charlottenburg) HRB 105123B, Tax-ID#:
> DE251602478
> Managing Director: René Rebe
> http://exactcode.com | http://exactscan.com | http://ocrkit.com |
> http://t2-project.org | http://rene.rebe.de
>
> -----------------------------------------------------------
> If you wish to unsubscribe from this mailing, send mail to
> [email protected] with a subject of: unsubscribe t2
--
ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin, https://exactcode.com
https://exactscan.com | https://ocrkit.com | https://t2sde.org |
https://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
