On 28 Jun 2019, at 10:22, Carlo Pisani <[email protected]> wrote:
> how much are you willing to pay for a ShoeHorn?
> I might be able to find one.
Honestly not that much, because I have already spend too much money on
esoteric hardware that does not boost my day-to-day productivity.
There is an ebay auction of an Octane with Shoehorn, but I’m not
spending 300 to 500 $ or what that was on that. Maybe more like 50.
But again, is not really that important for myself.
>> I know, but don't you have a hint for sorting it out?
>> besides, I'd like to see *exactly* what you have improved on the top
>> of gentoo's patches
>
> this information would be helpful to handle your patches among what we
> are doing with other people's patches and our own patches.
I spend a whole month working all my spare time on re-basing my 3.x
patchset to 4.x. When I had most stuff mostly working again I accidentally
discovered the Gentoo patches in some cached archive on some extern
ftp or so mirror. They were quite good and close to what I had already.
I mostly fixed some PCI bridge endianess swapping on top of that so that
audio worked, maybe another things here or there, you can simply just diff
them anyway. I also already spend over two weeks on Impact cursor
and video mode reverse engineering.
I was not aware that the Gentoo folks updated it again, and I just took
a look and their patches are so much harder to extract for review than
our very publicly sorted and published #t2sde exposure.
René
> Il giorno ven 21 giu 2019 alle ore 16:25 Carlo Pisani
> <[email protected]> ha scritto:
>>
>> your patches for 4.12 seem derived from Gentoo's patches.
>> Anyway, we have been testing everything from 4.02 to 4.18, and there
>> are a lot of problems
>> 1) problems with smp_stop and panic, the machine doesn't correctly
>> reset on panic()
>> 2) problems with preemption, the kernel reports
>> "BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1"
>> 3) problems with a secondary QLA card, the kernel hangs in an infinite
>> loop saying
>> "BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1"
>> 4) problems with a "headless" configuration, the kernel seems to have
>> hardcoded checks for addresses, so if you don't have a GFX installed
>> the kernel structures get corrupted
>> 5) problems at initializing the GFX if you don't have "console=g" set
>> in the firmware
>> 6) ... etc
>>
>> would you like to collaborate?
>>
>> Il giorno ven 7 giu 2019 alle ore 20:35 Rene Rebe
>> <[email protected]> ha scritto:
>>>
>>> Hey,
>>>
>>> Yes with 2,50$ per day with vintage gpu videos I will become Millionaire in
>>> no time.
>>>
>>> You know what, as your links are of such uttermost importance to you just
>>> put them back and all over again (I actually did not ask you to remove them
>>> in the first place, only to do it less).
>>>
>>> I love you very much too,
>>>
>>> Sent on the go - http://ExactCODE.com Germany.
>>>
>>>> On 7. Jun 2019, at 19:33, Carlo Pisani <[email protected]> wrote:
>>>>
>>>> dude, I understand you are on YouTube just to get money, you always
>>>> spam your shitty "give me money on Patreon to support my works,
>>>> blablabla" in every fucking quote, and this is ok! But now you are
>>>> getting on my nerves!
>>>>
>>>> Promotion links are for commercial products, we are a non-profit
>>>> community, and I have NEVER put any promotion links in your channel,
>>>> this is a sneaky sentence of yours, which really shows your deep
>>>> intentions!
>>>>
>>>> Your website is all-a-I-want-the-money without anything useful, and it
>>>> sucks because there is no way to have a discussion, and Youtube is not
>>>> even the place for discussing stuff!
>>>>
>>>> So, I have informed people about a forum project, where we are trying
>>>> to create a mini-community dedicated to a particular kind of hacks.
>>>> There is nothing similar on the web.
>>>>
>>>> And you have tried to ridicule us! Shame!
>>>>
>>>> Your English sucks, it's so fucking difficult to understand because
>>>> you talk in German-English, and you are boring, and your videos are
>>>> useless because you do not offer any links, material, datasheet, code,
>>>> anything useful, and you make your videos with a so embarrassing poor
>>>> quality that the last two live-shows crashed!
>>>>
>>>> Your effort is just at taking people for the piss, You clearly want
>>>> the money, and nothing else. And it's clear now!
>>>>
>>>> In fact, you say "spam" to what? I have also reported a couple of
>>>> RISC-V boards, which we are not affiliated with (we are not paid for
>>>> promoting them), and the reason is clear: as above said, your videos
>>>> are rather useless when the only thing you do is blathering about a
>>>> datasheet without any content, material, and related stuff.
>>>
--
ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin, https://exactcode.com
https://exactscan.com | https://ocrkit.com | https://t2sde.org |
https://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
