Ok, now it downloads (with the 0 cksum work around) but we now hit a
dependency issue:
INFO: download from mirror failed, trying original URL.
########################################################################
100.0%##O=# #
########################################################################
100.0%
Finished downloading 4682000 bytes in 4.019212 seconds (1164966.000
bytes/sec).
compressing xz file + cksum-test: download/mirror/g/glib-2.62.2.tar.xz
./scripts/Download: line 532: xzcat: command not found
seems like the xz stuff is not built yet, I have a patch (or two) for
that, attached. (broken out from my previous patch dump)
After applying the patch, remove the error stuff from the
download/g/(glib-whatever) to force a clean download & uncompress.
Then iglib should build,
Jan
On 2/4/20 12:24 AM, Jan Rovins wrote:
Hmm, bad checksum on glib, I'm going to set it to 0 just so I cam
continue with the build.
== 02/04/20 05:18:11 =[0]=> Aborted building package glib.
-> Unmounting loop mounts ...
(T2-chroot):root@j-ryzen-3950:/opt/t2-trunk#scripts/Download glib
INFO: To force a new mirror auto-detection, remove download/Mirror-Cache.
INFO: Found cached mirror URL in download/Mirror-Cache:
INFO: http://dl.t2-project.org/mirror/9.0
Downloading glib:download/mirror/g/glib-2.62.2.tar.xz ...
ERROR: Found download/mirror/g/glib-2.62.2.tar.xz.cksum-err.
ERROR: That means that we downloaded the file already and it had an
ERROR: incorrect checksum. Remove the *.cksum-err file to force a
ERROR: new download of that file.
Jan
On 2/4/20 12:20 AM, Jan Rovins wrote:
Ok, I just hit the ninja error (same as before)
===[hook_eval:130 (last $?=0)> sort
==[hook_eval:131 (last $?=0)> '[' 5 ']'
==[hook_eval:131 (last $?=0)> eval './configure.py --bootstrap'
===[hook_eval:131 (last $?=0)> ./configure.py --bootstrap
fl_wrapper.so: write outside basedir (/opt/t2-trunk):
/usr/lib/python3.7/encodings/__pycache__/__init__.cpython-37.pyc.139965801578800
Due to previous errors, no 0-ninja.log file!
(Try enabling xtrace in the config to track an error inside the build
system.)
--- BUILD ERROR ---
Creating file list and doing final adaptions ...
Searching for orphaned files ...
Found 5 files for this package.
Found 0 orphaned files for this package.
Clear (old) md5sums ...
Creating md5sum files ... done.
Creating package description ...
Making post-install adaptions.
== 02/04/20 04:55:14 =[0]=> Aborted building package ninja.
Applying the attached patch, and re-building python allows the ninja
build to succeed.
Jan
On 2/3/20 11:50 PM, Jan Rovins wrote:
Ok, Rene, I have added symlinks for arch & uname into bin (I used
the ones from /usr/embutils)
And now the Build-Target is off and running, got past glibc, so I
will just let it run.
for scsijon: I am at version 49198 and am using
t2-minimal-glibc-gcc-x86-64-r49128.iso as the reference for the
chroot binaries.
Jan
On 2/3/20 4:21 AM, René Rebe wrote:
Hi,
as per my long YT development & test livestream this is coreutils
not being installed correctly causing uname and arch not being in /bin
You can probably move them over and re build coreutils to fully fix
this.
Yes, it is also rather annoying and time consuming for myself that
each time we spin an ISO there are upstream regressions. Warning:
t2/trunk glibc update breaks glib and thus many other depends if
you build a large package selection. I will try to hunt down what
is wrong between glib and glibc another day, Google and mailing
lists did not yet had an answer for that @GLIBC PRIVATE symbol. For
now I would locally revert the glibc update…
René
On 3. Feb 2020, at 06:04, Jan Rovins <[email protected]> wrote:
Hi Rene,
Can't seem to get at anything useful to trace this, it's failing
very early in the T2 wrappers, before the glibc debug dir is created.
ERROR-LOG attached.
Jan
On 2/2/20 11:08 PM, Jan Rovins wrote:
Hi Rene & List.
Just got my new fast build server set up, and saw that the new
iso was out, so I figured that I'd try a fresh T2 chroot build
with the latest from svn.
Attached are the scripts that I'm using to set up the chroots, if
you wan to review them & share them on the site.
I will send outy notes on each regression as I hit them.
The build is a minimal generic, without anything special.
The first thing that I ran into was with glibc stage 0:
===[eval_config_command:284 (last $?=0)> ../configure
--prefix=/opt/t2-trunk/build/default-9.0-svn-generic-x86-64-linux/usr
--enable-hacker-mode
--with-headers=/opt/t2-trunk/build/default-9.0-svn-generic-x86-64-linux/usr/include
--with-libpam --with-pam --enable-libpam --enable-pam --with-tls
--with-__thread --enable-obsolete-rpc --disable-profile
--disable-multi-arch --enable-kernel=2.6.32 --with-fp
--with-gnu-binutils --build=-nocross-linux-gnu
--host=x86_64-t2-linux-gnu --cache-file=./config.cache --without-gd
configure: loading cache ./config.cache
checking build system type... config.sub: invalid option
-nocross-linux-gnu
Try `config.sub --help' for more information.
configure: error: /bin/sh ../scripts/config.sub
-nocross-linux-gnu failed
Due to previous errors, no 0-glibc.log file!
(Try enabling xtrace in the config to track an error inside the
build system.)
--- BUILD ERROR ---
Will start on debugging this next, and send an update shortly.
Jan
<ERROR-LOG.txt>-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
Index: target/generic/pkgsel/10-bootstrap.in
===================================================================
--- target/generic/pkgsel/10-bootstrap.in (revision 49140)
+++ target/generic/pkgsel/10-bootstrap.in (working copy)
@@ -43,6 +43,8 @@
X m4
X make
X meson
+X xz
+# xz is needed for glib build
X ninja
X man
X mine
glib wants to uncompress with xz, but that is not built yet,
so lets move it up in the build order.
Index: package/archiver/xz/xz.desc
===================================================================
--- package/archiver/xz/xz.desc (revision 49140)
+++ package/archiver/xz/xz.desc (working copy)
@@ -38,7 +38,7 @@
[L] OpenSource
[S] Beta
[V] 5.2.4
-[P] X 0----5---9 108.600
+[P] X 0----5---9 105.600
[O] var_append confopt ' ' ' --disable-lzmadec --disable-lzmainfo --disable-lzma-links'
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
