Hi list
the discussions around the correct modeling of a motorway/divided
highway intersection continue at
https://www.openstreetmap.org/changeset/120498123
If you can offer suggestions, your help is welcome
Tony
Using the tag the tag highway = cycleway indicates that the route is
designated for bicycles only.
In Victoria, this is hardly the case as most paths are generally
signed as shared paths. I?ve yet to come across a dedicated cycle
path during my riding.
regards,
Sebastian
On 17 May 2022, at 6:15 pm, Andrew Davidson <[email protected]> wrote:
?On 16/5/22 23:38, Kim Oldfield via Talk-au wrote:
Can I please clarify "using highway=cycleway should only be used
where there are signs allowing"?
That is how I've always used it in urban areas.
This would only apply in NSW/VIC. In other jurisdictions putting up
signs has become pointless because you can ride anywhere. In
Canberra almost none of the shared path system has explicit
signage. I use cycleway to tag "primary" routes and footway for
"secondary" routes.
So this would be a cycleway:
https://upload.wikimedia.org/wikipedia/commons/thumb/d/dd/Bike_path_in_Dickson%2C_Canberra%2C_Australia.jpg/576px-Bike_path_in_Dickson%2C_Canberra%2C_Australia.jpg
and this is a footway:
https://upload.wikimedia.org/wikipedia/commons/thumb/6/65/Footpath_in_Hackett%2C_Canberra%2C_Australia.jpg/576px-Footpath_in_Hackett%2C_Canberra%2C_Australia.jpg
_______________________________________________
Talk-au mailing list
[email protected]
https://lists.openstreetmap.org/listinfo/talk-au
_______________________________________________
Talk-au mailing list
[email protected]
https://lists.openstreetmap.org/listinfo/talk-au
