Hallo, hab ein kleines Problem mit meinem SIMpad bei der Umstellung auf Linux, hab mich an die Anleitung von OpenSIMpad.org gehalten. Lief alles prima, nur minicom wollte nicht, habs dann mit Hyperterminal übertragen notgedrungen. Hab verschiedene (mit dem Online Builder gemachte stable und unstable) Images durch probiert. Hängt immer bei "Freeing init memory: 116K" und der Bildschirm bleibt schwarz. Wird ne PCMCIA Karte eingesteckt/herausgezogen zeigt er das auch noch an. Konnte leider nirgens ne Lösung finden. Hier mal der Terminal-Output.
Gruß Torsten Seriell Terminal Emulation Output: U3 @00000348 F04000000 *MTST 00000001 00000002 00000004 00000008 00000010 00000020 00000040 00000080 00000100 00000200 00000400 00000800 00001000 00002000 00004000 00008000 00010000 00020000 00040000 00080000 00100000 00200000 00400000 00800000 01000000 02000000 04000000 08000000 10000000 20000000 40000000 80000000 MBK2 00000001 0000E59F 00000002 0000E59F 00000004 0000E59F 00000008 0000E59F 00000010 0000E59F 00000020 0000E59F 00000040 0000E59F 00000080 0000E59F 00000100 0000E59F 00000200 0000E59F 00000400 0000E59F 00000800 0000E59F 00001000 0000E59F 00002000 0000E59F 00004000 0000E59F 00008000 0000E59F 00010000 0001E59F 00020000 0002E59F 00040000 0004E59F 00080000 0008E59F 00100000 0010E59F 00200000 0020E59F 00400000 0040E59F 00800000 0080E59F 01000000 0100E59F 02000000 0200E59F 04000000 0400E59F 08000000 0800E59F 10000000 1000E59F 20000000 2000E59F 40000000 4000E59F 80000000 8000E59F ENDM STKP C19F3FF0 setting flashword=50000000 Flash style = 1x16 verify flash size... btflash_init: mfrid=00000089 devid=00000018 mfrid=00000089 deviceid=00000018 walking flash descriptors (1x16) btflash_init: found flash 28F128J3A_1x16 flashDescriptor=00031894 flashSectors=00031474 nsectors=00000100 flash_size=02000000 flash_address_mask=03FFFFFF Read back MQ200 ID is 0x4BE00C02 Correct Device ID should be 0x02004D51. - retrying Rebooting...U3 @00000348 F04000000 *MTST 00000001 00000002 00000004 00000008 00000010 00000020 00000040 00000080 00000100 00000200 00000400 00000800 00001000 00002000 00004000 00008000 00010000 00020000 00040000 00080000 00100000 00200000 00400000 00800000 01000000 02000000 04000000 08000000 10000000 20000000 40000000 80000000 MBK2 00000001 0000E59F 00000002 0000E59F 00000004 0000E59F 00000008 0000E59F 00000010 0000E59F 00000020 0000E59F 00000040 0000E59F 00000080 0000E59F 00000100 0000E59F 00000200 0000E59F 00000400 0000E59F 00000800 0000E59F 00001000 0000E59F 00002000 0000E59F 00004000 0000E59F 00008000 0000E59F 00010000 0001E59F 00020000 0002E59F 00040000 0004E59F 00080000 0008E59F 00100000 0010E59F 00200000 0020E59F 00400000 0040E59F 00800000 0080E59F 01000000 0100E59F 02000000 0200E59F 04000000 0400E59F 08000000 0800E59F 10000000 1000E59F 20000000 2000E59F 40000000 4000E59F 80000000 8000E59F ENDM STKP C19F3FF0 setting flashword=50000000 Flash style = 1x16 verify flash size... btflash_init: mfrid=00000089 devid=00000018 mfrid=00000089 deviceid=00000018 walking flash descriptors (1x16) btflash_init: found flash 28F128J3A_1x16 flashDescriptor=00031894 flashSectors=00031474 nsectors=00000100 flash_size=02000000 flash_address_mask=03FFFFFF MQ200 - Revision ID=0x00000002 Machine type--> SIMpad mach_type ->00000057 reset_partitions: partition_table = 0x00000000 reset_partitions: flashDescriptor = 0x00031894 define_partition: base 0x00000000 define_partition: partition_table 0x00000000 allocated partition_table defining partition: bootldr define_partition: base 0x00040000 define_partition: partition_table 0xC1A00014 defining partition: root define_partition: base 0x01800000 define_partition: partition_table 0xC1A00014 defining partition: home initialize_by_mach_type done probing ram Probing bank0 memory size... bank0 memory size=04000000 MDCNFG=0000F367 dram_size_ptr=00032888 Probing memory size bank=00000000 dram[0]=04000000 mem_size=[i]04000000 mem_saves[i]=08000000 mem_size=[i]02000000 mem_saves[i]=02000000 mem_size=[i]01000000 mem_saves[i]=01000000 maybe mem_size=04000000 found= 04000000 mem_size[i]=08000000 mem_saves[i]=30303030 mem_size[i]=04000000 mem_saves[i]=08000000 mem_size[i]=02000000 mem_saves[i]=02000000 mem_size[i]=01000000 mem_saves[i]=01000000 memory size=04000000 dram_size_ptr=0003289C Probing memory size bank=00000001 dram[0]=C8000C02 seems to be no dram in bank=00000001 n_banks=00000001 dram_sizes[0]=04000000 dram_sizes[1]=20000080 SDRAM size: 0x04000000 in megs: 64M >> Compaq OHH BootLoader, Rev 2-21-13 [BIG_KERNEL] [MD5] [MONO] >> 04-11-20_15:58 >> Last link date: Sat Nov 20 15:58:14 GMT 2004 >> Contact: [email protected] Cpu company: INTEL Cpu Architecture: StrongArm Cpu Part: SA1110 processor ID: 6901B118 >> (c) 2000-2001 Compaq Computer Corporation, provided with NO WARRANTY under the terms of the GNU General Public Licen. >> See http://www.handhelds.org/bootldr/ for full license and sourcesPress Return to start the OS now, any other key fou params_eval: prefix_in =bootldr: params_eval: just_show =00000000 define_partition: base 0x00040000 define_partition: partition_table 0xC1A00014 defining partition: throwaway_bootldr_partition params_eval_file: tmpPart->base =00040000 params_eval_file: tmpPart->size =017C0000 Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds! build_list: max = 017BFFBC . dir entries = 0000037C frag entries = 0000117F +4 increments = 00000000 +file_offset increments = 0000152B find_inode failed for name=params Failed to find inode pef: loaded a file of size 00000000 failed to load params file /boot/params ... partition <throwaway_bootldr_partition> deleted RXSTAT error: 000000FF booting jffs2... booting boot/zImage from partition >root< loaded file of size = 0x001B3480 at location 0xC0008000 kernel partition base C0008000 kernel_magic=E1A00000 kernel_region_words[9]=016F2818 Linux ELF flash_imgstart=50040000 size=017C0000 dest=C0000000 offset=00008000 MMU Control=C19F4071 MMU PIDVAM=00000000 Skipping kernel copy by request. C0008000: E1A00000 C0008004: E1A00000 C0008008: E1A00000 C000800C: E1A00000 C0008010: E1A00000 C0008014: E1A00000 C0008018: E1A00000 C000801C: E1A00000 C0008020: EA000002 C0008024: 016F2818 root_filesystem_name=ramdisk Grabbed linuxargs, argc = 00000001 Using mach_type 00000057 setting boot parameters to noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttySA0 mdcnfg=0000F367 Making core tag at C0000100 Making cmdline tag at C0000114 Making mem32 tag at C00001D4 command line is: mtdparts=sa1100:0x00040...@0x00000000(bootldr)ro,0x017c0...@0x00040000(root),0x00800...@0x01800000(hom linuxEntryPoint=C0008000 Booting Linux image Uncompressing Linux..................................................................................................... Linux version 2.6.24 (k...@amethyst) (gcc version 4.2.4) #1 PREEMPT Sun Mar 29 06:00:47 CEST 2009 CPU: StrongARM-1110 [6901b118] revision 8 (ARMv4), cr=c000717f Machine: Simpad Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: mtdparts=sa1100:0x00040...@0x00000000(bootldr)ro,0x017c0...@0x00040000(root),0x00800...@0x01800000 PID hash table entries: 256 (order: 8, 1024 bytes) Console: colour dummy device 80x30 console [ttySA0] enabled Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61184KB available (3284K code, 299K data, 116K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=4 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered audit: initializing netlink socket (disabled) audit(0.840:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler cfq registered (default) mq200 video driver found Vendor: 0x4D51 Device: 0x200 MQ-200: DC00R = 0x0EF2082A Console: switching to colour frame buffer device 100x37 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 ipmi message handler version 39.1 Serial: SA11x0 driver $Revision: 1.50 $ sa11x0-uart.1: ttySA1 at MMIO 0x80010000 (irq = 15) is a SA1100 sa11x0-uart.3: ttySA0 at MMIO 0x80050000 (irq = 17) is a SA1100 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded input: Touchscreen panel as /class/input/input0 input: SIMpad Switches as /class/input/input1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx sa1100-0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled SA1100 flash: CFI device at 0x00000000, 16MiB, 16-bit sa1100-1: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled SA1100 flash: CFI device at 0x08000000, 16MiB, 16-bit Concatenating MTD devices: (0): "sa1100-0" (1): "sa1100-1" into device "sa1100" 3 cmdlinepart partitions found on MTD device sa1100 SA1100 flash: using dynamic partition definition Creating 3 MTD partitions on "sa1100": 0x00000000-0x00040000 : "bootldr" 0x00040000-0x01800000 : "root" 0x01800000-0x02000000 : "home" mice: PS/2 mouse device common for all mice input: gpio-keys as /class/input/input2 sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0 SA1100/PXA2xx Watchdog Timer: timer margin 60 sec Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). Simpad audio support initialized 2 ALSA device list: #0: Siemens Simpad with Philips UCB1x00 TCP cubic registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. sa1100-rtc sa1100-rtc: setting system clock to 2056-08-28 06:52:30 UTC (2734671150) JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) a. VFS: Mounted root (jffs2 filesystem). Freeing init memory: 116K -- ---------------------------------------------------------------------------- PUG - Penguin User Group Wiesbaden - http://www.pug.org
