Salah satu server saya sering protes CPU overheat
$ dmesg|tail
CPU0: Running in modulated clock mode
CPU1: Running in modulated clock mode
CPU0: Temperature above threshold
CPU1: Temperature above threshold
CPU1: Running in modulated clock mode
CPU0: Running in modulated clock mode
CPU1: Temperature above threshold
CPU0: Temperature above threshold
CPU0: Running in modulated clock mode
CPU1: Running in modulated clock mode
$ sensors
it87-i2c-0-2d
Adapter: SMBus PIIX4 adapter at 1000
VCore 1: +2.59 V (min = +1.62 V, max = +1.79 V) ALARM
VCore 2: +1.33 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +3.31 V (min = +3.14 V, max = +3.47 V)
+5V: +5.13 V (min = +4.76 V, max = +5.24 V)
+12V: +11.97 V (min = +10.82 V, max = +13.18 V)
-12V: -5.47 V (min = -0.00 V, max = -0.00 V) ALARM
-5V: -7.17 V (min = -13.17 V, max = -10.84 V) ALARM
Stdby: +3.17 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +3.49 V
fan1: 3590 RPM (min = 3013 RPM, div = 8)
M/B Temp: +59 C (low = -1 C, high = -1 C) sensor = diode
CPU Temp: +78 C (low = -1 C, high = -1 C) sensor = thermistor
$ cpufreq-info
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [EMAIL PROTECTED], please.
analyzing CPU 0:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 375 MHz - 3.00 GHz
available frequency steps: 375 MHz, 750 MHz, 1.13 GHz, 1.50 GHz,
1.88 GHz, 2.25 GHz, 2.63 GHz, 3.00 GHz
available cpufreq governors: ondemand, userspace, performance
current policy: frequency should be within 375 MHz and 3.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 375 MHz.
analyzing CPU 1:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 375 MHz - 3.00 GHz
available frequency steps: 375 MHz, 750 MHz, 1.13 GHz, 1.50 GHz,
1.88 GHz, 2.25 GHz, 2.63 GHz, 3.00 GHz
available cpufreq governors: ondemand, userspace, performance
current policy: frequency should be within 375 MHz and 3.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 375 MHz.
$ cat /proc/acpi/thermal_zone/THRM/
cooling_mode polling_frequency state temperature
trip_points
$ cat /proc/acpi/thermal_zone/THRM/state
state: ok
$ cat /proc/acpi/thermal_zone/THRM/temperature
temperature: -127 C
$ cat /proc/acpi/thermal_zone/THRM/trip_points
critical (S5): 70 C
passive: 68 C: tc1=4 tc2=3 tsp=60 devices=0xe7ec2338
active[0]: 68 C: devices=0xe7ec2cfc
Ada ide mesti diapakan lagi?
TIA
--
andika
--
FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab
Unsubscribe: kirim email ke [EMAIL PROTECTED]
Arsip dan info milis selengkapnya di http://linux.or.id/milis
