Andika Triwidada wrote:
Salah satu server saya sering protes CPU overheat
$ dmesg|tail
CPU0: Running in modulated clock mode
CPU1: Running in modulated clock mode
CPU0: Temperature above threshold
CPU1: Temperature above threshold
CPU1: Running in modulated clock mode
CPU0: Running in modulated clock mode
CPU1: Temperature above threshold
CPU0: Temperature above threshold
CPU0: Running in modulated clock mode
CPU1: Running in modulated clock mode
$ sensors
it87-i2c-0-2d
Adapter: SMBus PIIX4 adapter at 1000
VCore 1: +2.59 V (min = +1.62 V, max = +1.79 V) ALARM
VCore 2: +1.33 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +3.31 V (min = +3.14 V, max = +3.47 V)
+5V: +5.13 V (min = +4.76 V, max = +5.24 V)
+12V: +11.97 V (min = +10.82 V, max = +13.18 V)
-12V: -5.47 V (min = -0.00 V, max = -0.00 V) ALARM
-5V: -7.17 V (min = -13.17 V, max = -10.84 V) ALARM
Stdby: +3.17 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +3.49 V
fan1: 3590 RPM (min = 3013 RPM, div = 8)
M/B Temp: +59 C (low = -1 C, high = -1 C) sensor = diode
CPU Temp: +78 C (low = -1 C, high = -1 C) sensor = thermistor
$ cpufreq-info
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [EMAIL PROTECTED], please.
analyzing CPU 0:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 375 MHz - 3.00 GHz
available frequency steps: 375 MHz, 750 MHz, 1.13 GHz, 1.50 GHz,
1.88 GHz, 2.25 GHz, 2.63 GHz, 3.00 GHz
available cpufreq governors: ondemand, userspace, performance
current policy: frequency should be within 375 MHz and 3.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 375 MHz.
analyzing CPU 1:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 375 MHz - 3.00 GHz
available frequency steps: 375 MHz, 750 MHz, 1.13 GHz, 1.50 GHz,
1.88 GHz, 2.25 GHz, 2.63 GHz, 3.00 GHz
available cpufreq governors: ondemand, userspace, performance
current policy: frequency should be within 375 MHz and 3.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 375 MHz.
$ cat /proc/acpi/thermal_zone/THRM/
cooling_mode polling_frequency state temperature
trip_points
$ cat /proc/acpi/thermal_zone/THRM/state
state: ok
$ cat /proc/acpi/thermal_zone/THRM/temperature
temperature: -127 C
$ cat /proc/acpi/thermal_zone/THRM/trip_points
critical (S5): 70 C
passive: 68 C: tc1=4 tc2=3 tsp=60 devices=0xe7ec2338
active[0]: 68 C: devices=0xe7ec2cfc
Ada ide mesti diapakan lagi?
TIA
--
andika
bersihkan semua CPU dari debu2 yang nempel.
Kalau sudah coba cek apakah heatsink menempel dengan baik ke prosesor?
biasanya kalau cpu sudah lama, silikonnya sudah gak bagus lagi nempel ke
prosesornya.
bisa diakali dengan menambahkan lagi silikon gel nya dan ditempel
kembali, atau
beli heatsink baru :)
saya sering mengalami seperti yang pak andika alami... :)
--
FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab
Unsubscribe: kirim email ke [EMAIL PROTECTED]
Arsip dan info milis selengkapnya di http://linux.or.id/milis
