Hello Richard, Tuesday, December 12, 2006, 12:00:10 AM, you wrote:
GK>> My token serial number was like FAT-xxxxxxxx (can be FAT32-xxxxxxxx) RW> Where do you find that? All I got was the activation key, nothing about RW> a token serial number. In fact I'd never heard of the need for a token RW> before I had the trouble today. You'll find it mentioned in the window popping up when activating. RW> By the way, is the token the same as the activation key? I'm a bit RW> lost here. Yes, that is how I would use it referring to the long string that the Ritlabs web site gives you at activation. I mentioned token serial number as well referring to a string that Voyager generates and is unique to your USB stick. RW> That might be the problem. I reactivated with a new activation RW> key. Unfortunately this actually means that I am at loss with what is your problem. Since my guess of what is going on with your installation was based on assuming your serial serial number was altered. RW> Big problem. As I've said, I didn't save the original activation RW> key. :-( But then I didn't either of my USB sticks. No problem at all. I offered you a hack. Surely the way I go about this is not the recommended way for any normal installation. It gives you the possibility to reinstall Voyager on the USB stick even after you formatted it without using a new reactivation. RW> "Usage: volumeid <driveletter:>xxxx-xxxx" A simple command DIR <driveletter:> at the command prompt will reveal this number -- Best regards, Gerrit Kiers Using The Bat! v3.85.03 on Windows 2000 5.0 Build 2195 Service Pack 4 -- ________________________________________________ Current version is 3.85.03 | 'Using TBUDL' information: http://www.silverstones.com/thebat/TBUDLInfo.html
