First make sure it's enabled in the Fog Services on the server. You
probably did that.
Next, be patient, What I saw while imaging is that the client will go
through a couple reboots immediately after it gets an image.
It appears the dirty bit is turned on and it goes through a complete
chkdsk, reboots,
It then comes back up and if your lucky, you'll see a small dialogue box
come up saying it's going to change the hostname., reboots, then I
think it will come up cleanly with the specified hostnames.
This is what I've seen happen.
Scott
JimHays wrote:
Does anyone have any experience with the hostname changer in FOG? I
have re-imaged a lab but the hostnames are not being changed.
Any advice would be appreciated.
TIA
_______________________________________________
Tech-geeks mailing list
[email protected]
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
--
Scott R. Williams
Fisher School District
801 S . 5th St.
Fisher, Il 61843
_______________________________________________
Tech-geeks mailing list
[email protected]
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
