Can you boot into debug mode and give the output from fdisk -l
Thanks On Mon, 2010-07-26 at 16:02 -0500, Pam wrote: > Scott, > I de-fragmented it before I got it ready to upload. It dies out right > before it starts copying the blocks. It looks like everything is > going like it should and it clicks to the blue screen for a couple of > seconds but then says "restoring mbr". > > Any more ideas? > thanks, > Pam > > touch /images/dev/.mntcheck > > touch /images/.mntcheck > > On Mon, Jul 26, 2010 at 3:42 PM, Scott Williams > <[email protected]> wrote: > > Pam, > > > > Does it die out with some kind of error? Is it at the stage of "resizing > > Partition"? > > > > If so, you may want to Defragment your drive before pulling this image. > > > > Scott > > > > Pam wrote: > > > > I've had problems with uploading a Win 7 box as well. I've run the > > fogprep as administrator and it says "update complete" and I turn the > > machine off to let the fog server wake it. But when I try to upload, > > the process dies out after about 3-4 minutes. When I navigate to > > \\images on the fog server the folder size is 0. > > > > Ideas? > > TIA, > > Pam > > > > On Mon, Jul 26, 2010 at 2:09 PM, CHUCK SYPERSKI <[email protected]> > > wrote: > > > > > > You may want to try again to troubleshoot, make sure you run as > > administrator (ie: right click on fog prep and select run as > > administrator). Then navigate to the command and run it. This will > > allow you to confirm that it exits successfully (without errors). The > > other thing to make sure is that if you are using the windows sys > > partition, that it is only 100MB. > > > > On Tue, 2010-07-27 at 00:16 -0500, Vicki M Sexton wrote: > > > > > > Yes I did. Should I try that again? > > > > > > Vicki M. Sexton > > District Technology Coordinator > > Carmi-White County Schools > > Carmi, IL 62821 > > [email protected] > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of CHUCK SYPERSKI > > Sent: Monday, July 26, 2010 11:58 AM > > To: [email protected] > > Subject: Re: [tech-geeks] Win 7 Fog Question > > > > Did you run fog prep right before the upload? > > > > > > > > On Mon, 2010-07-26 at 23:49 -0500, Vicki M Sexton wrote: > > > > > > After attempting to deploy a Win7 image using Fog, I get this message > > on the machine: > > > > Windows failed to start > > > > The boot selection failed because a required device is inaccessible. > > > > Any suggestions? > > > > Vicki M. Sexton > > > > District Technology Coordinator > > > > Carmi-White County Schools > > > > Carmi, IL 62821 > > > > [email protected] > > > > | Subscription info at http://www.tech-geeks.org | > > > > > > | Subscription info at http://www.tech-geeks.org | > > > > > > > > > > | Subscription info at http://www.tech-geeks.org | > > > > > > | Subscription info at http://www.tech-geeks.org | > > > > > > > > > > > > -- > > Scott R. Williams > > > > Fisher School District > > 801 S . 5th St. > > Fisher, Il 61843 > > > > > > > > > > > > > > | Subscription info at http://www.tech-geeks.org | > > > > > | Subscription info at http://www.tech-geeks.org |
