My Dell PE 1600SC server had the back cooling fan fail and it kept shutting down the server. I found a replacement online to order, but in the meantime I took a fan out of an old PE2400 server (same size) and it appears to be working OK. Here is my question:
The original fan was labeled 12.5 V, 1.5 A The one I am using is 12.5 V 0.74A Am I OK to use this unit, with the different Amp rating, until my replacement arrives? Eric THIS TRANSMISSION IS INTENDED AND RESTRICTED FOR USE BY THE ABOVE ADDRESSEE ONLY. IT MAY CONTAIN CONFIDENTIAL AND/OR PRIVILEGED INFORMATION EXEMPT FROM DISCLOSURE UNDER FEDERAL OR STATE LAW. IN THE EVENT SOME OTHER PERSON OR ENTITY RECEIVES THIS TRANSMISSION, SAID RECIPIENT IS HEREBY NOTIFIED THAT ANY DISSEMINATION, DISTRIBUTION, OR DUPLICATION OF THIS TRANSMISSION OR ITS CONTENTS IS PROHIBITED. IF YOU SHOULD RECEIVE THIS TRANSMISSION IN ERROR, PLEASE CALL WOODLAND CUSD#5 IMMEDIATELY AT 815-672-5974, DELETE THE FILE FROM YOUR SYSTEM, AND DESTROY ANY HARD COPIES OF THIS TRANSMISSION. THANK YOU. THIS TRANSMISSION IS INTENDED AND RESTRICTED FOR USE BY THE ABOVE ADDRESSEE ONLY. IT MAY CONTAIN CONFIDENTIAL AND/OR PRIVILEGED INFORMATION EXEMPT FROM DISCLOSURE UNDER FEDERAL OR STATE LAW. IN THE EVENT SOME OTHER PERSON OR ENTITY RECEIVES THIS TRANSMISSION, SAID RECIPIENT IS HEREBY NOTIFIED THAT ANY DISSEMINATION, DISTRIBUTION, OR DUPLICATION OF THIS TRANSMISSION OR ITS CONTENTS IS PROHIBITED. IF YOU SHOULD RECEIVE THIS TRANSMISSION IN ERROR, PLEASE CALL WOODLAND CUSD#5 IMMEDIATELY AT 815-672-5974, DELETE THE FILE FROM YOUR SYSTEM, AND DESTROY ANY HARD COPIES OF THIS TRANSMISSION. THANK YOU. | Subscription info at http://www.tech-geeks.org |
