I'm getting this message on both of my alphas...can anyone tell me what
I'm doing wrong? I've double checked the PIN.... same one I use to log
into the console
Firmware tarball /usr/share/cryptech-alpha-firmware.tar.gz content:
-rw-r--r-- root/root 5324179 2017-12-15 09:31:00 alpha_fmc.bit
-rwxr-xr-x root/root 60644 2017-12-15 09:31:53 bootloader.bin
-rwxr-xr-x root/root 1455424 2017-12-15 09:31:53 bootloader.elf
-rwxr-xr-x root/root 494344 2017-12-15 09:31:55 hsm.bin
-rwxr-xr-x root/root 2465640 2017-12-15 09:31:55 hsm.elf
-rw-r--r-- root/root 2529 2017-12-14 17:32:43 tamper.hex
-rw-r--r-- root/root 3340 2017-12-15 09:32:01 MANIFEST
Uploading hsm.bin from /usr/share/cryptech-alpha-firmware.tar.gz
Initializing management port and synchronizing with HSM, this may take a
few seconds
wheel PIN:
Device does not seem to be ready for a file transfer (got
'\r\n\r\nAccess denied\r\n\r\nUsername: ')
Access denied
_______________________________________________
Tech mailing list
Tech@cryptech.is
https://lists.cryptech.is/listinfo/tech
