Misc considerations. * most locking racks use exactly the same key for every rack distributed in the field (see also:apc) * the XrackPro is very nice if you need noise reduction. They are also fairly expensive and limited to the heat load that you can install. Something worth checking. * Chatsworth may have an option that provides for custom keying. I'd expect to find it from them before APC. * Even with a key, racks are not that hard to get into. You'd be offering a minor deterrant. They use chain link fence and heavy duty dead bolts or electronic locks at colos for good reason. * a door trigger sensor + camera + stupid-easy-key might be a good combination. You'd casually deter, have an alarm (audible is good in this case) and a record (camera).
Sent from my android device. -----Original Message----- From: NC <[email protected]> To: LOPSA Tech <[email protected]> Sent: Wed, 18 Jun 2014 5:33 PM Subject: Re: [lopsa-tech] Securing a 24u rack cabinet? Most cabinets are available with locking sides and doors, (ex: http://www.blackbox.com/Store/Detail.aspx/Select-Server-Cabinet-with-Tempered-Glass-Door-15U/RM2410A) Is that not good enough, or must it have more burly locks added? Two things to make sure you take into account, sound and heat: If it’s in a shared space, 24U of server hardware makes a pretty solid amount of ‘white noise,’ that may be unappreciated. As well, the room is unlikely to be kept at a comfortable temperature for servers, so you may want your half cab to provide some cooling. I’ve used a 1/2 cab white box sound proof rack, and found that while it did indeed deal with the sound, we were overheating the servers inside on a regular basis. That rack was meant for audio equipment, and not the 6 DL360’s we packed it with, so our bad. Other than that, good luck, m. From: Matt Simmons [email protected] Reply: Matt Simmons [email protected] Date: June 18, 2014 at 2:15:32 PM To: LOPSA Tech [email protected] Subject: [lopsa-tech] Securing a 24u rack cabinet? I have an interesting use case. Because of a lack of space, a few machines which were "free range" in a locked office are now going to have to go into a shared space. The powers that be are concerned about the security of these machines, both in terms of the hardware being "liberated" and data exfiltration. The machines are interesting because not only do they not require external network connections, they can't have it. The project specs require an air gap between the machines' network and my infrastructure. My kneejerk reaction is that I should order a half height rackmount cabinet, special-order locks, and have modifications made so that it can be bolted or chained to the floor, but I've never had to bank vault-ify a rack before, so I thought I'd ask you first. If you had to secure a rack from access in a public, shared space, and it didn't require external network access (so no tender, vulnerable wires poking out), how would you do it? What product(s) would you recommend? Also, there's really no concern about securing the power feed. If it gets unplugged, that's sad, but it's not tragic, because neither the machines nor their data have been compromised in that case. Thoughts? Thanks for your time! ---Matt -- LITTLE GIRL: But which cookie will you eat FIRST? COOKIE MONSTER: Me think you have misconception of cookie-eating process. _______________________________________________ Tech mailing list [email protected] https://lists.lopsa.org/cgi-bin/mailman/listinfo/tech This list provided by the League of Professional System Administrators http://lopsa.org/
_______________________________________________ Tech mailing list [email protected] https://lists.lopsa.org/cgi-bin/mailman/listinfo/tech This list provided by the League of Professional System Administrators http://lopsa.org/
