I like this, but i was also too stupid to run usbdevs to find
vendor/product id for my device (and i'm too embarrassed to tell how
actually found it).
/jtm
On Tue, April 20, 2010 15:23, Stuart Henderson wrote:
> after reading the N hundredth misc@ post with some USB device
> where device/vendor IDs haven't been shown, it seems that printing
> them in the device attach line might save some trouble.
>
> any comments/suggestions?
>
>
> Index: usb_subr.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/usb/usb_subr.c,v
> retrieving revision 1.73
> diff -u -p -r1.73 usb_subr.c
> --- usb_subr.c 14 Jan 2009 21:02:57 -0000 1.73
> +++ usb_subr.c 20 Apr 2010 13:08:53 -0000
> @@ -1281,7 +1281,9 @@ usbd_print(void *aux, const char *pnp)
> printf(" interface %d", uaa->ifaceno);
>
> if (!pnp)
> - printf(" %s\n", devinfop);
> + printf(" %s (0x%04x:0x%04x)\n", devinfop,
> + UGETW(uaa->device->ddesc.idVendor),
> + UGETW(uaa->device->ddesc.idProduct));
> usbd_devinfo_free(devinfop);
> return (UNCONF);
> }
>
>
> OpenBSD 4.7-current (GENERIC.MP) #34: Tue Apr 20 14:03:40 BST 2010
> st...@symphytum.spacehopper.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error 80<clock_battery>
> cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
> real mem = 1597034496 (1523MB)
> avail mem = 1538363392 (1467MB)
> RTC BIOS diagnostic error 80<clock_battery>
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @ 0xe8e70
> (32 entries)
> bios0: vendor Acer version "v0.3309" date 10/06/2008
> bios0: Acer AOA150
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
> acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3)
> ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
> GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 4
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 5 (P32_)
> acpiprt2 at acpi0: bus 1 (EXP1)
> acpiprt3 at acpi0: bus 2 (EXP2)
> acpiprt4 at acpi0: bus 3 (EXP3)
> acpiprt5 at acpi0: bus 4 (EXP4)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> acpibtn2 at acpi0: SLPB
> acpibat0 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit offline
> acpivideo0 at acpi0: OVGA
> acpivout0 at acpivideo0: CRT1
> acpivout1 at acpivideo0: DTV1
> acpivout2 at acpivideo0: DFP1
> acpivout3 at acpivideo0: LCD_
> acpivout4 at acpivideo0: DTV2
> acpivout5 at acpivideo0: DFP2
> bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
> cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0x60000000, size 0x10000000
> inteldrm0 at vga1: apic 4 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic
> 4 int 16 (irq 11)
> azalia0: codecs: Realtek ALC268
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int
> 16 (irq 255)
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int
> 17 (irq 255)
> pci2 at ppb1 bus 2
> re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480),
> apic 4 int 17 (irq 11), address 00:23:8b:43:96:e6
> rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int
> 18 (irq 255)
> pci3 at ppb2 bus 3
> ral0 at pci3 dev 0 function 0 "Ralink RT2790" rev 0x00: apic 4 int 18 (irq
> 11), address 00:22:43:14:9b:35
> ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R)
> ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int
> 19 (irq 255)
> pci4 at ppb3 bus 4
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int
> 16 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int
> 17 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int
> 18 (irq 11)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int
> 19 (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int
> 16 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 (0x8086:0x0000)
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci5 at ppb4 bus 5
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG MMCRE64G5MXP-0VB>
> wd0: 16-sector PIO, LBA48, 61057MB, 125045424 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4
> int 17 (irq 11)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 (0x8086:0x0000)
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 (0x8086:0x0000)
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 (0x8086:0x0000)
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 (0x8086:0x0000)
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co.,
> Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2 (0x0c45:0x62c0)
> video0 at uvideo0
> umsm0 at uhub3 port 2 configuration 1 interface 0 "Option N.V.
> Globetrotter HSUPA Modem" rev 1.10/0.00 addr 2 (0x0af0:0x7211)
> ucom0 at umsm0
> umsm1 at uhub3 port 2 configuration 1 interface 1 "Option N.V.
> Globetrotter HSUPA Modem" rev 1.10/0.00 addr 2 (0x0af0:0x7211)
> ucom1 at umsm1
> umsm2 at uhub3 port 2 configuration 1 interface 2 "Option N.V.
> Globetrotter HSUPA Modem" rev 1.10/0.00 addr 2 (0x0af0:0x7211)
> ucom2 at umsm2
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> ugen0 at uhub2 port 1 "LIEBERT PowerSure Personal XT" rev 1.10/0.00 addr 2
> (0x06da:0xffff)
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Ten X Technology,
> Inc. TEMPer sensor" rev 1.10/1.50 addr 2 (0x1130:0x660c)
> uhidev0: iclass 3/1
> uthum0 at uhidev0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Ten X Technology,
> Inc. TEMPer sensor" rev 1.10/1.50 addr 2 (0x1130:0x660c)
> uhidev1: iclass 3/0
> uthum1 at uhidev1
> uthum1: sensor0: Temperature sensor (ds75/12bit), calibration offset =
> -1.0 deg-C
> uthum1: sensor1: Temperature sensor (NTC), calibration offset = 1.0 deg-C
> uthum0 detached
> uhidev0 detached
> uthum1 detached
> uhidev1 detached
