This is on a HP ProBook 4510s.
apm -a and apm -b seem to give me correct info. apm -z does nothing as
far as I can tell.
Also, when ACPI is enabled (which must be done in order for SMP to work)
audio and video skips a lot. I have no idea why, but when ACPI (and
therefor SMP) is disabled everything is nice and smooth.
Still, this is an improvement. with 4.7 this laptop would not boot
unless ACPI was disabled.
OpenBSD 4.8-beta (GENERIC.MP) #304: Wed Aug 4 20:26:11 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error
7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
cpu0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class)
2.10 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE
real mem = 2072080384 (1976MB)
avail mem = 2028208128 (1934MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/15/09, SMBIOS rev. 2.4 @ 0x7bac3000
(21 entries)
bios0: vendor Hewlett-Packard version "68PZI Ver. F.0F" date 10/20/2009
bios0: Hewlett-Packard HP ProBook 4510s
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SLIC SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class)
2.10 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (RP05)
acpiprt5 at acpi0: bus 133 (RP06)
acpiprt6 at acpi0: bus 134 (PCIB)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpipwrres3 at acpi0: PFN6
acpipwrres4 at acpi0: PFN7
acpipwrres5 at acpi0: PFN8
acpipwrres6 at acpi0: PFN9
acpipwrres7 at acpi0: PFNA
acpipwrres8 at acpi0: PFNB
acpipwrres9 at acpi0: PGF0
acpitz0 at acpi0: critical temperature 108 degC
acpipwrres10 at acpi0: PFN0
acpipwrres11 at acpi0: PFN1
acpipwrres12 at acpi0: PFN2
acpipwrres13 at acpi0: PFN3
acpipwrres14 at acpi0: PFN4
acpipwrres15 at acpi0: PFN5
acpitz1 at acpi0: critical temperature 105 degC
acpitz2 at acpi0: critical temperature 108 degC
acpitz3 at acpi0: critical temperature 105 degC
acpitz4 at acpi0: critical temperature 108 degC
acpitz5 at acpi0: critical temperature 110 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 02691 2009/06/24 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
bios0: ROM list: 0xc0000/0xfe00! 0xd0000/0x1000 0xd1000/0x1000
cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2101, 2100, 1600, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq
11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq
10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int
17 (irq 11)
azalia0: codecs: Analog Devices AD1984A, Intel/0x2802, using Analog Devices
AD1984A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq
10)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq
11)
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1 int 17
(irq 11), MIMO 1T2R, MoW, address 00:26:c6:0d:99:44
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (irq
10)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq
10)
pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq
11)
pci5 at ppb4 bus 133
mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8072" rev 0x10, Yukon-2
Extreme rev. B0 (0x2): apic 1 int 17 (irq 11)
msk0 at mskc0 port A: address 18:a9:05:cf:b6:67
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq
10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
10)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21
(irq 10), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250410AS, 0006> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT20L, DC05> ATAPI 5/cdrom removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
# sysctl hw.sensors
hw.sensors.acpitz0.temp0=16.00 degC (zone temperature)
hw.sensors.acpitz1.temp0=37.00 degC (zone temperature)
hw.sensors.acpitz2.temp0=36.00 degC (zone temperature)
hw.sensors.acpitz3.temp0=37.00 degC (zone temperature)
hw.sensors.acpitz4.temp0=22.80 degC (zone temperature)
hw.sensors.acpitz5.temp0=30.00 degC (zone temperature)
hw.sensors.acpibat0.volt0=10.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.53 VDC (current voltage)
hw.sensors.acpibat0.amphour0=4.04 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.20 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.10 Ah (low capacity)
hw.sensors.acpibat0.amphour3=4.20 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=0 (battery full), OK
hw.sensors.acpibat0.raw1=0 (rate)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.cpu0.temp0=29.00 degC
