Were you running apmd?
On Fri, Aug 06, 2010 at 03:20:48PM -0700, Tim Howe wrote:
> This is on a HP ProBook 4510s.
>
> apm -a and apm -b seem to give me correct info. apm -z does nothing as
> far as I can tell.
>
> Also, when ACPI is enabled (which must be done in order for SMP to work)
> audio and video skips a lot. I have no idea why, but when ACPI (and
> therefor SMP) is disabled everything is nice and smooth.
>
> Still, this is an improvement. with 4.7 this laptop would not boot
> unless ACPI was disabled.
>
>
> OpenBSD 4.8-beta (GENERIC.MP) #304: Wed Aug 4 20:26:11 MDT 2010
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error
> 7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
> cpu0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class)
> 2.10 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE
> real mem = 2072080384 (1976MB)
> avail mem = 2028208128 (1934MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 09/15/09, SMBIOS rev. 2.4 @ 0x7bac3000
> (21 entries)
> bios0: vendor Hewlett-Packard version "68PZI Ver. F.0F" date 10/20/2009
> bios0: Hewlett-Packard HP ProBook 4510s
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SLIC SSDT SSDT SSDT
> acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
> RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
> USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class)
> 2.10 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> acpiprt0 at acpi0: bus -1 (PEGP)
> acpiprt1 at acpi0: bus 1 (RP01)
> acpiprt2 at acpi0: bus 2 (RP02)
> acpiprt3 at acpi0: bus 3 (RP03)
> acpiprt4 at acpi0: bus 68 (RP05)
> acpiprt5 at acpi0: bus 133 (RP06)
> acpiprt6 at acpi0: bus 134 (PCIB)
> acpiprt7 at acpi0: bus 0 (PCI0)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C2, C1, PSS
> acpicpu1 at acpi0: C2, C1, PSS
> acpipwrres0 at acpi0: APPR
> acpipwrres1 at acpi0: COMP
> acpipwrres2 at acpi0: LPP_
> acpipwrres3 at acpi0: PFN6
> acpipwrres4 at acpi0: PFN7
> acpipwrres5 at acpi0: PFN8
> acpipwrres6 at acpi0: PFN9
> acpipwrres7 at acpi0: PFNA
> acpipwrres8 at acpi0: PFNB
> acpipwrres9 at acpi0: PGF0
> acpitz0 at acpi0: critical temperature 108 degC
> acpipwrres10 at acpi0: PFN0
> acpipwrres11 at acpi0: PFN1
> acpipwrres12 at acpi0: PFN2
> acpipwrres13 at acpi0: PFN3
> acpipwrres14 at acpi0: PFN4
> acpipwrres15 at acpi0: PFN5
> acpitz1 at acpi0: critical temperature 105 degC
> acpitz2 at acpi0: critical temperature 108 degC
> acpitz3 at acpi0: critical temperature 105 degC
> acpitz4 at acpi0: critical temperature 108 degC
> acpitz5 at acpi0: critical temperature 110 degC
> acpibat0 at acpi0: BAT0 model "Primary" serial 02691 2009/06/24 type LIon oem
> "Hewlett-Packard"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: SLPB
> acpibtn1 at acpi0: LID_
> acpivideo0 at acpi0: DGFX
> acpivideo1 at acpi0: GFX0
> acpivout0 at acpivideo1: DD02
> bios0: ROM list: 0xc0000/0xfe00! 0xd0000/0x1000 0xd1000/0x1000
> cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2101, 2100, 1600, 1200 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0x80000000, size 0x10000000
> inteldrm0 at vga1: apic 1 int 16 (irq 10)
> drm0 at inteldrm0
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> (irq 10)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> (irq 11)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> (irq 10)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> (irq 10)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1
> int 17 (irq 11)
> azalia0: codecs: Analog Devices AD1984A, Intel/0x2802, using Analog Devices
> AD1984A
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
> (irq 10)
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17
> (irq 11)
> pci2 at ppb1 bus 2
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1 int 17
> (irq 11), MIMO 1T2R, MoW, address 00:26:c6:0d:99:44
> ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18
> (irq 10)
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
> (irq 10)
> pci4 at ppb3 bus 68
> ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 1 int 17
> (irq 11)
> pci5 at ppb4 bus 133
> mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8072" rev 0x10, Yukon-2
> Extreme rev. B0 (0x2): apic 1 int 17 (irq 11)
> msk0 at mskc0 port A: address 18:a9:05:cf:b6:67
> eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> (irq 10)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22
> (irq 10)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> (irq 10)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20
> (irq 10)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci6 at ppb5 bus 134
> pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21
> (irq 10), AHCI 1.2
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250410AS, 0006> SCSI3 0/direct fixed
> sd0: 238475MB, 512 bytes/sec, 488397168 sec total
> cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT20L, DC05> ATAPI 5/cdrom removable
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
>
>
> # sysctl hw.sensors
> hw.sensors.acpitz0.temp0=16.00 degC (zone temperature)
> hw.sensors.acpitz1.temp0=37.00 degC (zone temperature)
> hw.sensors.acpitz2.temp0=36.00 degC (zone temperature)
> hw.sensors.acpitz3.temp0=37.00 degC (zone temperature)
> hw.sensors.acpitz4.temp0=22.80 degC (zone temperature)
> hw.sensors.acpitz5.temp0=30.00 degC (zone temperature)
> hw.sensors.acpibat0.volt0=10.80 VDC (voltage)
> hw.sensors.acpibat0.volt1=12.53 VDC (current voltage)
> hw.sensors.acpibat0.amphour0=4.04 Ah (last full capacity)
> hw.sensors.acpibat0.amphour1=0.20 Ah (warning capacity)
> hw.sensors.acpibat0.amphour2=0.10 Ah (low capacity)
> hw.sensors.acpibat0.amphour3=4.20 Ah (remaining capacity), OK
> hw.sensors.acpibat0.raw0=0 (battery full), OK
> hw.sensors.acpibat0.raw1=0 (rate)
> hw.sensors.acpiac0.indicator0=On (power supply)
> hw.sensors.cpu0.temp0=29.00 degC
