A small pile of Fujitsu Siemens Scenic machines landed in my lap, all of
them apparently with onboard Broadcom gigabit ethernet that are
recognized as
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001):
apic 2 int 16, address 00:30:05:84:9a:5d
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
However, they fail to configure properly. As in dhclient bge0 never
completes, while the corresponing activity lights on the switch flash in
a pattern not obviously related to expected activity. I have 3 of
these, tried them all, with different cables and put sk or xl cards in
to test too.
The funny thing is, a casual glance at recent commits don't really turn
up anything relevant. But then again, I haven't tried to backtrack to
earlier releases yet.
Any of this sound familiar?
dmesg follows:
OpenBSD 5.0-beta (GENERIC) #0: Fri Jul 22 18:47:01 CEST 2011
r...@quarto.bsdly.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 1063776256 (1014MB)
avail mem = 1036320768 (988MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/05/05, BIOS32 rev. 0 @ 0xfd690, SMBIOS
rev. 2.31 @ 0xefe60 (86 entries)
bios0: vendor FUJITSU SIEMENS // Phoenix Technologies Ltd. version "5.00
R1.11.1844" date 04/05/2005
bios0: FUJITSU SIEMENS D1844
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP ASF! MCFG APIC BOOT
acpi0: wakeup devices PEXA(S4) PEXB(S4) PEXC(S4) PEXD(S4) PEXE(S4) USB1(S4)
USB2(S4) USB3(S4) USB4(S4) USB5(S4) PCIH(S4) AC97(S4) MC97(S4) KEYB(S4)
PS2M(S4) COM1(S1) COM2(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xd0000000, bus 0-10
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEXA)
acpiprt2 at acpi0: bus 3 (PEXB)
acpiprt3 at acpi0: bus 5 (PEXC)
acpiprt4 at acpi0: bus 7 (PEXD)
acpiprt5 at acpi0: bus 9 (PEXE)
acpiprt6 at acpi0: bus 11 (PCIH)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xa600! 0xca800/0x1000 0xe0000/0x4000!
memory map conflict 0xfff00000/0x100000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915G Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915G Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 2 int 17
pci1 at ppb0 bus 3
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001):
apic 2 int 16, address 00:30:05:84:9a:5d
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03: apic 2 int 16
pci2 at ppb1 bus 5
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: apic 2 int 18
pci3 at ppb2 bus 7
ppb3 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03: apic 2 int 19
pci4 at ppb3 bus 9
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 2 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 2 int 21
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 2 int 20
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd3
pci5 at ppb4 bus 11
"TI TSB12LV23 FireWire" rev 0x00 at pci5 dev 7 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-3500AG, 2.88> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HDT722525DLA380>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-3200CL5
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-3200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston DataTraveler 112"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 112, 1.00> SCSI2 0/direct
removable serial.0951162aFB31B6031B7A
sd0: 14762MB, 512 bytes/sector, 30233588 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (c45f82cf8c94c709.a) swap on wd0b dump on wd0b
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
