On Sun, Mar 25, 2012 at 12:03 PM, Theo de Raadt <[email protected]> wrote:
> > This bug report shows a fault address in a privately build kernel. > This problem occurred in a snapshot kernel. Here is an updated picture of the error message: http://devio.us/~roby/uvm_fault.jpg (please refresh if you see the old image. Error message has not changed, but I was careful to capture the entire screen.) This is the appropriate dmesg for that kernel. OpenBSD 5.1-current (RAMDISK_CD) #13: Sun Mar 25 02:43:36 MDT 2012 [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 4257169408 (4059MB) avail mem = 4123840512 (3932MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (43 entries) bios0: vendor Apple Inc. version "MB31.88Z.008E.B02.0803051832" date 03/05/08 bios0: Apple Inc. MacBook3,1 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT SSDT SSDT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz, 2194.87 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 197MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (RP05) acpiprt2 at acpi0: bus 3 (RP06) acpiprt3 at acpi0: bus 4 (PCIB) memory map conflict 0xf00f8000/0x1000 memory map conflict 0xfed1c000/0x4000 memory map conflict 0xfffa0000/0x30000 pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 16 ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel 82801H HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: msi pci2 at ppb1 bus 2 "Broadcom BCM4321" rev 0x03 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x03: msi pci3 at ppb2 bus 3 mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8058" rev 0x13, Yukon-2 EC Ultra rev. B0 (0x3): apic 1 int 17 msk0 at mskc0 port A: address 00:1b:63:ad:0b:ee eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 18 uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 21 ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 20 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 pci4 at ppb3 bus 4 "AT&T/Lucent FW322 1394" rev 0x61 at pci4 dev 3 function 0 not configured "Intel 82801HBM LPC" rev 0x03 at pci0 dev 31 function 0 not configured pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRW GSA-S10N, BP10> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 1 int 18 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <SAMSUNG HM250JI> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 "Intel 82801H SMBus" rev 0x03 at pci0 dev 31 function 3 not configured usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 rum0 at uhub1 port 1 "vendor 0x148f product 0x2573" rev 2.00/0.01 addr 2 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:0e:2e:f6:98:33 "vendor 0x05ac product 0x8300" rev 2.00/0.0c addr 3 at uhub1 port 4 not configured uhidev0 at uhub2 port 1 configuration 1 interface 0 "vendor 0x05ac product 0x1000" rev 2.00/19.65 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub2 port 1 configuration 1 interface 1 "vendor 0x05ac product 0x1000" rev 2.00/19.65 addr 2 uhidev1: iclass 3/1 uhid at uhidev1 not configured uhidev2 at uhub6 port 1 configuration 1 interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/0.16 addr 2 uhidev2: iclass 3/0, 38 report ids uhid at uhidev2 reportid 36 not configured uhid at uhidev2 reportid 37 not configured uhid at uhidev2 reportid 38 not configured uhidev3 at uhub6 port 2 configuration 1 interface 0 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.07 addr 3 uhidev3: iclass 3/1 ukbd1 at uhidev3 wskbd1 at ukbd1 mux 1 wskbd1: connecting to wsdisplay0 uhidev4 at uhub6 port 2 configuration 1 interface 1 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.07 addr 3 uhidev4: iclass 3/1, 5 report ids uhid at uhidev4 reportid 2 not configured uhid at uhidev4 reportid 5 not configured uhidev5 at uhub6 port 2 configuration 1 interface 2 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.07 addr 3 uhidev5: iclass 3/0 uhid at uhidev5 not configured softraid0 at root scsibus1 at softraid0: 256 targets sd0 at scsibus1 targ 1 lun 0: <OPENBSD, SR CONCAT, 005> SCSI2 0/direct fixed sd0: 6149MB, 512 bytes/sector, 12593360 sectors root on rd0a swap on rd0b dump on rd0b sd1 at scsibus1 targ 2 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd1: 20481MB, 512 bytes/sector, 41945187 sectors
