*HI *I have* **qlogic* FC HBA card which is not detecting the LUN I think the problem is with targeting...I have diabled acpicpu at boot time and using OpenBSD 5.1 amd64
Any advice or help..... * ________________________________________________________________________________ isp0* at pci4 dev 0 function 0 "QLogic ISP2432" rev 0x03: apic 9 int 6 *isp0*: board type 2422 rev 0x3, resident firmware rev 4.0.26 scsibus0 at *isp0*: 512 targets, WWPN 21000024ff364ae8, WWNN 20000024ff364ae8 *isp0*: 0.0.0 FCP RESPONSE: 0x2 *isp0*: 0.0.0 FCP RESPONSE: 0x2 *isp0*: 0.1.0 FCP RESPONSE: 0x2 *isp0*: 0.1.0 FCP RESPONSE: 0x2 isp1 at pci4 dev 0 function 1 "QLogic ISP2432" rev 0x03: apic 9 int 13 isp1: board type 2422 rev 0x3, resident firmware rev 4.0.26 scsibus1 at isp1: 512 targets, WWPN 21000024ff364ae9, WWNN 20000024ff364ae9 isp1: 0.0.0 FCP RESPONSE: 0x2 isp1: 0.0.0 FCP RESPONSE: 0x2 isp1: 0.1.0 FCP RESPONSE: 0x2 isp1: 0.1.0 FCP RESPONSE: 0x2 ____________________________________________________________________________________- Complete dmesg can be shown http://old.nabble.com/Mount-San-Disk-from-IBM-DS3400-tc34491545.html#
