On Thu, Oct 4, 2012 at 11:52 AM, mohit sah <[email protected]> wrote: > *HI *I have* **qlogic* FC HBA card which is not detecting the LUN > > I think the problem is with targeting...I have diabled acpicpu at boot time > and using OpenBSD 5.1 amd64
> Any advice or help..... I don't know if this is the right advice, but I suspect you need to recompile your kernel with the following option: ISP_FIRMWARE_2400 Ciao, David > * > ________________________________________________________________________________ > isp0* at pci4 dev 0 function 0 "QLogic ISP2432" rev 0x03: apic 9 int 6 > > *isp0*: board type 2422 rev 0x3, resident firmware rev 4.0.26 > > scsibus0 at *isp0*: 512 targets, WWPN 21000024ff364ae8, WWNN > 20000024ff364ae8 > > *isp0*: 0.0.0 FCP RESPONSE: 0x2 > > *isp0*: 0.0.0 FCP RESPONSE: 0x2 > > *isp0*: 0.1.0 FCP RESPONSE: 0x2 > > *isp0*: 0.1.0 FCP RESPONSE: 0x2 > > isp1 at pci4 dev 0 function 1 "QLogic ISP2432" rev 0x03: apic 9 int 13 > > isp1: board type 2422 rev 0x3, resident firmware rev 4.0.26 > > scsibus1 at isp1: 512 targets, WWPN 21000024ff364ae9, WWNN 20000024ff364ae9 > > isp1: 0.0.0 FCP RESPONSE: 0x2 > > isp1: 0.0.0 FCP RESPONSE: 0x2 > > isp1: 0.1.0 FCP RESPONSE: 0x2 > > isp1: 0.1.0 FCP RESPONSE: 0x2 > ____________________________________________________________________________________- > Complete dmesg can be shown > http://old.nabble.com/Mount-San-Disk-from-IBM-DS3400-tc34491545.html#
