On Fri, Nov 16, 2012 at 06:16:12PM +0000, [email protected] wrote: > Hi Mike, > > run0 is a external edimax usb device. Page fault occurs when > netstart/dhclient is being processed. Boot up without this network > device installed, insert device and manually sh /etc/netstart throws > out a page fault. > > This can happen 2/3 times then finally, whilst performing the above > process, I am able to successfully bring up the device. > > Reading uvm man page on a Friday night, I should have a beer instead ... >
How about a ddb trace? -ml > Regards, > M > > PS - if it helps, I hate Lenovo - 2 dead keyboards, 2 dead disks, a > BCM4315 and a poor bios > > On 11/16/12 18:02, Mike Larkin wrote: > >On Fri, Nov 16, 2012 at 10:13:19AM +0000, [email protected] wrote: > >>1. Just a quick note, has anyone else experienced a page fault when > >>using a Ralink adapter at either bootup or when running netstat? > >>Seems to be temperamental. > >> > >>2. Throwing it out to the masses, what's the best login and net fs > >>provision? (No-to NFS!!!) > >> > >>:) > >> > >What makes you think this has anything to do at all with Ralink? > > > >-ml > > > >>uvm_fault(0xd0a50760, 0x0, 0, 1) -> e > >>kernel: page fault trap, code=0 > >>Stopped at 0: uvm_fault(0xd0a50760, 0x0, 0, 1) -> e > >>kernel: page fault trap, code=0 > >>Stopped at db_read_bytes+0x14: movzbl 0(%esi,%ecx,1),%eax > >>ddb{0}> syncing disks... > >> > >>OpenBSD 5.2-current (GENERIC.MP) #98: Tue Nov 13 13:18:33 MST 2012 > >>[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > >>RTC BIOS diagnostic error 80<clock_battery> > >>cpu0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" > >>686-class) 1.67 GHz > >>cpu0: > >>FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF > >>real mem = 1062227968 (1013MB) > >>avail mem = 1033895936 (986MB) > >>mainbus0 at root > >>bios0 at mainbus0: AT/286+ BIOS, date 11/24/09, SMBIOS rev. 2.4 @ > >>0xea780 (31 entries) > >>bios0: vendor LENOVO version "1ACN22WW(V1.13)" date 11/24/2009 > >>bios0: LENOVO 2957 > >>acpi0 at bios0: rev 2 > >>acpi0: sleep states S3 S4 S5 > >>acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIX BOOT > >>acpi0: wakeup devices LID0(S3) P32_(S0) UHC1(S3) UHC4(S3) ECHI(S3) > >>EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0) > >>acpitimer0 at acpi0: 3579545 Hz, 24 bits > >>acpihpet0 at acpi0: 14318179 Hz > >>acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >>cpu0 at mainbus0: apid 0 (boot processor) > >>cpu0: apic clock running at 166MHz > >>cpu1 at mainbus0: apid 1 (application processor) > >>cpu1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" > >>686-class) 1.67 GHz > >>cpu1: > >>FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF > >>ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > >>ioapic0: misconfigured as apic 0, remapped to apid 4 > >>acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > >>acpiprt0 at acpi0: bus 0 (PCI0) > >>acpiprt1 at acpi0: bus 5 (P32_) > >>acpiprt2 at acpi0: bus 1 (EXP1) > >>acpiprt3 at acpi0: bus 2 (EXP2) > >>acpiprt4 at acpi0: bus 3 (EXP3) > >>acpiprt5 at acpi0: bus 4 (EXP4) > >>acpiec0 at acpi0 > >>acpicpu0 at acpi0: C3, C2, C1, PSS > >>acpicpu1 at acpi0: C3, C2, C1, PSS > >>acpitz0 at acpi0: critical temperature is 102 degC > >>acpibtn0 at acpi0: PWRB > >>acpibtn1 at acpi0: LID0 > >>acpibtn2 at acpi0: SLPB > >>acpibat0 at acpi0: BAT0 model "GC86508SAT0 " type LION oem "SANYO " > >>acpiac0 at acpi0: AC unit online > >>acpivideo0 at acpi0: OVGA > >>acpivout0 at acpivideo0: LCD_ > >>bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 > >>cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1333, 1066, 800 MHz > >>pci0 at mainbus0 bus 0: configuration mode 1 (bios) > >>pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 > >>vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 > >>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > >>wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > >>intagp0 at vga1 > >>agp0 at intagp0: aperture at 0x40000000, size 0x10000000 > >>inteldrm0 at vga1: apic 4 int 16 > >>drm0 at inteldrm0 > >>"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > >>azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi > >>azalia0: codecs: Realtek ALC272 > >>audio0 at azalia0 > >>ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 > >>pci1 at ppb0 bus 1 > >>ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 > >>pci2 at ppb1 bus 2 > >>"Broadcom BCM4315" rev 0x01 at pci2 dev 0 function 0 not configured > >>ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18 > >>pci3 at ppb2 bus 3 > >>re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL > >>(0x2480), apic 4 int 18, address 00:01:02:03:04:06 > >>rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 > >>ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19 > >>pci4 at ppb3 bus 4 > >>uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16 > >>uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17 > >>uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 > >>uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19 > >>ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16 > >>usb0 at ehci0: USB revision 2.0 > >>uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > >>ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > >>pci5 at ppb4 bus 5 > >>ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM > >>disabled > >>pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, > >>channel 0 configured to compatibility, channel 1 configured to > >>compatibility > >>pciide0: channel 0 disabled (no drives) > >>pciide0: channel 1 ignored (disabled) > >>ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, > >>AHCI 1.1 > >>scsibus0 at ahci0: 32 targets > >>sd0 at scsibus0 targ 0 lun 0: <ATA, KINGSTON SS100S2, D100> SCSI3 > >>0/direct fixed t10.ATA_KINGSTON_SS100S216G_16GB40014661_ > >>sd0: 15272MB, 512 bytes/sector, 31277232 sectors, thin > >>ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: > >>apic 4 int 17 > >>iic0 at ichiic0 > >>spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > >>usb1 at uhci0: USB revision 1.0 > >>uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > >>usb2 at uhci1: USB revision 1.0 > >>uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > >>usb3 at uhci2: USB revision 1.0 > >>uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > >>usb4 at uhci3: USB revision 1.0 > >>uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > >>isa0 at ichpcib0 > >>isadma0 at isa0 > >>pckbc0 at isa0 port 0x60/5 > >>pckbd0 at pckbc0 (kbd slot) > >>pckbc0: using irq 1 for kbd slot > >>wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >>pms0 at pckbc0 (aux slot) > >>pckbc0: using irq 12 for aux slot > >>wsmouse0 at pms0 mux 0 > >>pms0: Synaptics touchpad, firmware 7.2 > >>pcppi0 at isa0 port 0x61 > >>spkr0 at pcppi0 > >>npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > >>mtrr: Pentium Pro MTRR support > >>run0 at uhub0 port 2 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2 > >>run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address > >>00:01:02:03:04:05 > >>uvideo0 at uhub0 port 3 configuration 1 interface 0 "BISON > >>Corporation Lenovo EasyCamera" rev 2.00/3.15 addr 3 > >>video0 at uvideo0 > >>ugen0 at uhub4 port 1 "Broadcom Corp BCM2046 Bluetooth Device" rev > >>2.00/6.01 addr 2 > >>vscsi0 at root > >>scsibus1 at vscsi0: 256 targets > >>softraid0 at root > >>scsibus2 at softraid0: 256 targets > >>root on sd0a (xxx.a) swap on sd0b dump on sd0b > >>WARNING: / was not properly unmounted > >> > >> > >>uvm_fault(0xd0a50760, 0x0, 0, 1) -> e > >>kernel: page fault trap, code=0 > >>Stopped at 0: uvm_fault(0xd0a50760, 0x0, 0, 1) -> e > >>kernel: page fault trap, code=0 > >>Stopped at db_read_bytes+0x14: movzbl 0(%esi,%ecx,1),%eax > >>ddb{0}> syncing disks...
