> Date: Tue, 10 Jun 2014 18:25:33 +0300
> From: Paul Irofti <p...@irofti.net>
>
> After discussions with Theo we decided to walk the table where needed
> instead of using the soft state variables.
>
> Also adding all the Samsung models to the quirks table (as per the
> Linux EC quirks table).
This diff breaks my Samsung NC10. It provokes
acpitz: critical temperature exceeded 144C, shutting down
messages during boot. Below the dmesg from a standard -current kernel.
OpenBSD 5.5-current (GENERIC.MP) #0: Tue Jun 10 22:25:11 CEST 2014
kette...@albeniz.sibelius.xs4all.nl:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 1063612416 (1014MB)
avail mem = 1033764864 (985MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/25/08, BIOS32 rev. 0 @ 0xfd5f0, SMBIOS
rev. 2.5 @ 0xdf010 (36 entries)
bios0: vendor Phoenix Technologies Ltd. version "03CA.MP00.20081125.KTW" date
11/25/2008
bios0: SAMSUNG ELECTRONICS CO., LTD. NC10
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG TCPA TMOR APIC BOOT SLIC SSDT SSDT SSDT
acpi0: wakeup devices HDEF(S4) PXS1(S4) PXS2(S4) PXS3(S4) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) USB7(S3) SLT0(S4) SLT1(S4) SLT2(S4) SLT3(S4) SLT6(S4)
LANC(S4) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 98 degC
acpibat0 at acpi0: BAT1 type LION oem "SAMSUNG Electronics"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
bios0: ROM list: 0xc0000/0xec00! 0xdf000/0x1000! 0xe0000/0x1800!
cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x600
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC272
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
pci1 at ppb0 bus 2
ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 16
ath0: AR5424 14.2 phy 7.0 rf 0.0, EU1W, address 00:24:2b:1d:6b:25
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
pci2 at ppb1 bus 3
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8040" rev 0x13, Yukon-2 FE+
rev. A0 (0x0): apic 1 int 18
msk0 at mskc0 port A: address 00:13:77:b3:54:f0
eephy0 at msk0 phy 0: 88E3016 10/100 PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHZ2160BH G2>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Vimicro Corp. Namuga 1.3M
Webcam" rev 2.00/1.00 addr 2
video0 at uvideo0
ugen0 at uhub2 port 2 "Broadcom Corp BCM92045NMD" rev 2.00/3.54 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (ee2785ef03b6b4c5.a) swap on wd0b dump on wd0b
