On Wed, Jun 11, 2014 at 09:11:54AM +0300, Paul Irofti wrote: > On Tue, Jun 10, 2014 at 11:50:02PM +0200, Remi Locherer wrote: > > On Tue, Jun 10, 2014 at 06:25:33PM +0300, Paul Irofti wrote: > > > After discussions with Theo we decided to walk the table where needed > > > instead of using the soft state variables. > > > > > > Also adding all the Samsung models to the quirks table (as per the > > > Linux EC quirks table). > > > > > > > I tried this diff with my Samsung notebook. With sysctl hw.sensors or > > apm the state of the power supply is displayed correctly. If I change the > > status (disconnect or connect again) this is then also showed correctly. > > So this time it works... Did you apply the diff on top of a current sys?
I did a cvs up on June 10 and applied this diff on top of that. > > > But a current kernel (checkout from June 10) with this patch applied does > > not show the acpibat0 sensor values correctly. > > And this time it does not? With this diff hw.sensors.acpiac0.indicator0 works correctly but hw.sensors.acpibat0.amphourX does not. With snapshot kernels from June 6 and June 10 it's the other way round. > > I'm confused :-) I can imagin - the complexity of acpi combined with Samsung's implementation and my imprecise description ... ;-) > > > While at it I tried some recent snapshot kernels: > > - bsd.mp from May 23: > > shutdown because of wront acpitz temperatur > > - bsd.mp from June 6: > > hw.sensors.acpibat0.* recognized > > no reaction when I connect/reconnect the power supply > > - bsd.mp from June 10: > > same as June 6 > > > > > > # dmesg > > OpenBSD 5.5-current (GENERIC.MP) #172: Fri Jun 6 11:11:50 MDT 2014 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 3881746432 (3701MB) > > avail mem = 3769638912 (3595MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe0970 (63 entries) > > bios0: vendor Phoenix Technologies Ltd. version "P00ACX" date 04/26/2013 > > bios0: SAMSUNG ELECTRONICS CO., LTD. 900X3F > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SLIC SSDT ASF! HPET APIC MCFG FPDT SSDT SSDT UEFI > > MSDM UEFI UEFI > > acpi0: wakeup devices P0P1(S4) GLAN(S4) XHC_(S4) HDEF(S4) PXSX(S4) RP01(S4) > > PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP06(S4) > > PXSX(S4) RP07(S4) [...] > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1696.42 MHz > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1696.15 MHz > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1696.15 MHz > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 1, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1696.15 MHz > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (P0P1) > > acpiprt2 at acpi0: bus 1 (RP01) > > acpiprt3 at acpi0: bus -1 (RP02) > > acpiprt4 at acpi0: bus -1 (RP03) > > acpiprt5 at acpi0: bus 2 (RP04) > > acpiprt6 at acpi0: bus 3 (RP05) > > acpiprt7 at acpi0: bus -1 (RP06) > > acpiprt8 at acpi0: bus -1 (RP07) > > acpiprt9 at acpi0: bus -1 (RP08) > > acpiprt10 at acpi0: bus -1 (PEG0) > > acpiprt11 at acpi0: bus -1 (PEG1) > > acpiprt12 at acpi0: bus -1 (PEG2) > > acpiprt13 at acpi0: bus -1 (PEG3) > > acpiec0 at acpi0 > > acpicpu0 at acpi0: C3, C2, C1, PSS > > acpicpu1 at acpi0: C3, C2, C1, PSS > > acpicpu2 at acpi0: C3, C2, C1, PSS > > acpicpu3 at acpi0: C3, C2, C1, PSS > > acpipwrres0 at acpi0: FN00, resource for FAN0 > > acpipwrres1 at acpi0: FN01, resource for FAN1 > > acpipwrres2 at acpi0: FN02, resource for FAN2 > > acpipwrres3 at acpi0: FN03, resource for FAN3 > > acpipwrres4 at acpi0: FN04, resource for FAN4 > > acpitz0 at acpi0: critical temperature is 106 degC > > acpitz1 at acpi0: critical temperature is 106 degC > > acpibat0 at acpi0: BAT1 type LION oem "SAMSUNG Electronics" > > acpiac0 at acpi0: AC unit online > > acpibtn0 at acpi0: LID0 > > acpibtn1 at acpi0: PWRB > > acpivideo0 at acpi0: GFX0 > > acpivout0 at acpivideo0: DD02 > > cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1801, 1800, 1700, 1600, 1500, > > 1400, 1300, 1200, 1100, 1000, 900, 800, 774 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > > intagp at vga1 not configured > > inteldrm0 at vga1 > > drm0 at inteldrm0 > > drm: Memory usable by graphics device = 2048M > > inteldrm0: 1920x1080 > > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > > pci1 at ppb0 bus 1 > > "Atheros AR9462" rev 0x01 at pci1 dev 0 function 0 not configured > > ppb1 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi > > pci2 at ppb1 bus 2 > > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL > > (0x2c80), msi, address 18:67:b0:3e:b4:8f > > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5 > > ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi > > pci3 at ppb2 bus 3 > > "Renesas uPD720202 xHCI" rev 0x02 at pci3 dev 0 function 0 not configured > > ehci0 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel HM75 LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > > 1.3 > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, LITEONIT LMT-128, DM72> SCSI3 0/direct > > fixed t10.ATA_LITEONIT_LMT-128M6M_002306109122_ > > sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 > > int 18 > > iic0 at ichiic0 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > uhub1 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > > urtwn0 at uhub1 port 2 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 3 > > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 80:1f:02:da:13:e3 > > ugen0 at uhub1 port 5 "Atheros Communications product 0x3004" rev 1.10/0.01 > > addr 4 > > uvideo0 at uhub1 port 6 configuration 1 interface 0 "Namuga\M^? WebCam > > SC-13HDL11624N" rev 2.00/0.31 addr 5 > > video0 at uvideo0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed > > sd1: 122103MB, 512 bytes/sector, 250067198 sectors > > root on sd1a (3de85cf926cc73da.a) swap on sd1b dump on sd1b > > > > > > # sysctl hw > > hw.machine=amd64 > > hw.model=Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz > > hw.ncpu=4 > > hw.byteorder=1234 > > hw.pagesize=4096 > > hw.disknames=sd0:7811401194b2a453,sd1:3de85cf926cc73da > > hw.diskcount=2 > > hw.sensors.cpu0.temp0=49.00 degC > > hw.sensors.cpu1.temp0=49.00 degC > > hw.sensors.cpu2.temp0=49.00 degC > > hw.sensors.cpu3.temp0=49.00 degC > > hw.sensors.acpitz0.temp0=56.00 degC (zone temperature) > > hw.sensors.acpitz1.temp0=29.80 degC (zone temperature) > > hw.sensors.acpibat0.volt0=7.58 VDC (voltage) > > hw.sensors.acpibat0.volt1=8.62 VDC (current voltage) > > hw.sensors.acpibat0.current0=1.99 A (rate) > > hw.sensors.acpibat0.amphour0=5.90 Ah (last full capacity) > > hw.sensors.acpibat0.amphour1=0.00 Ah (warning capacity) > > hw.sensors.acpibat0.amphour2=0.18 Ah (low capacity) > > hw.sensors.acpibat0.amphour3=5.55 Ah (remaining capacity), OK > > hw.sensors.acpibat0.amphour4=5.88 Ah (design capacity) > > hw.sensors.acpibat0.raw0=1 (battery discharging), OK > > hw.sensors.acpiac0.indicator0=On (power supply) > > hw.sensors.acpibtn0.indicator0=On (lid open) > > hw.sensors.softraid0.drive0=online (sd1), OK > > hw.cpuspeed=774 > > hw.setperf=0 > > hw.vendor=SAMSUNG ELECTRONICS CO., LTD. > > hw.product=900X3F > > hw.version=0.1 > > hw.serialno=JDWH91GD500127 > > hw.uuid=00cfda5e-7dff-5e13-82b6-e14f17b76b50 > > hw.physmem=3881746432 > > hw.usermem=3873005568 > > hw.ncpufound=4 > > hw.allowpowerdown=1 >
