jumbos seem find. nfs seems fine. im going to put this and the other jalloc driver changes in to see what happens.
dlg On 20 Aug 2014, at 7:41, Brad Smith <[email protected]> wrote: > On 19/08/14 2:19 PM, Brad Smith wrote: >> On 18/08/14 6:24 PM, David Gwynne wrote: >>> On Sun, Jul 13, 2014 at 02:01:15PM +1000, David Gwynne wrote: >>>> i think i'll try to find the sk at work and wire it up. its just >>>> annoying cos im pretty sure its sr optics with sc connectors. >>>> >>>> thanks for testing. >>> >>> how's this one? >> >> Only running regular MTU traffic so far but the NIC at least works and >> beating on it I haven't seen any noticeable issues so far. I'll see if >> I can do some test with Jumbos a little later on today. >> >> sk0 9020 19 2 256 19 >> >> sk0 1500 <Link> 00:00:5a:98:b9:c0 29810991 0 23786214 0 0 >> >> skc0 at pci0 dev 5 function 0 "Schneider & Koch SK-98xx" rev 0x13, >> GEnesis (0x0): ivec 0x784 >> sk0 at skc0 port A: address 00:00:5a:98:b9:c0 >> brgphy0 at sk0 phy 1: BCM5400 1000baseT PHY, rev. 7 >> >> Some minor cosmetic issues I noticed while diff'ing the two revisions >> of the diff... >> >> m->m_len = m->m_pkthdr.len = SK_JLEN; >> >> has spaces instead of a tab and the whitespace after if_rxr_ioctl(). > > Running either netrate or tcpbench targetted at the test system and > its still working Ok. No packet loss. > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean.
