On Thu, Jul 09, 2015 at 03:53:26PM +0200, Mark Kettenis wrote:
> > Date: Thu, 9 Jul 2015 15:40:37 +0200
> > From: Stefan Sperling <[email protected]>
> >
> > Allow more time for USB athn(4) firmware boot. It seems people on
> > daemonforums
> > are running into the previous 1 second timeout on some machines, which the
> > driver will treat as fatal. I'm not sure if this will really fix the issue
> > but it won't hurt. Also reported in NetBSD land which inherited our driver:
> > http://mail-index.netbsd.org/current-users/2014/05/06/msg024793.html
>
> Sure. ok kettenis@
I found one laptop of mine can reproduce this issue.
It's a thinkpad x130e with an AMD APU chipset, dmesg below.
This should be similar hardware as the daemonforums reporter is using
("AMD E350") http://daemonforums.org/showpost.php?p=55318&postcount=38
If I plug a USB hub into this laptop, no devices behind the hub do attach.
Not even mice, USB storage sticks, etc. I never noticed this issue before,
but it's probably not new. I never used a USB hub with this machine before.
My current guess is the Atheros device doesn't get sufficient juice to
power up properly for some reason.
OpenBSD 5.8-beta (GENERIC.MP) #584: Thu Jul 9 12:02:49 CEST 2015
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1701904384 (1623MB)
avail mem = 1646514176 (1570MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf9d00 (58 entries)
bios0: vendor LENOVO version "8RET52WW (1.15 )" date 11/15/2011
bios0: LENOVO 305162G
acpi0 at bios0: rev 4
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG UEFI UEFI SSDT SSDT UEFI
acpi0: wakeup devices PB4_(S4) PB5_(S4) PB6_(S4) PB7_(S4) OHC1(S3) EHC1(S3)
OHC2(S3) SBAZ(S4) GEC_(S4) P2P_(S5) SPB0(S4) SPB1(S4) SPB2(S4) SPB3(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD E-300 APU with Radeon(tm) HD Graphics, 1297.59 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD E-300 APU with Radeon(tm) HD Graphics, 1297.24 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-31
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB4_)
acpiprt2 at acpi0: bus 1 (PB5_)
acpiprt3 at acpi0: bus 2 (PB6_)
acpiprt4 at acpi0: bus 3 (PB7_)
acpiprt5 at acpi0: bus 4 (P2P_)
acpiprt6 at acpi0: bus -1 (SPB0)
acpiprt7 at acpi0: bus -1 (SPB1)
acpiprt8 at acpi0: bus -1 (SPB2)
acpiprt9 at acpi0: bus -1 (SPB3)
acpiec0 at acpi0
acpicpu0 at acpi0: C2(0@100 io@0x841), PSS
acpicpu1 at acpi0: C2(0@100 io@0x841), PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "45N1176" serial 875 type LION oem "SANYO"
acpibtn2 at acpi0: LID_
cpu0: 1297 MHz: speeds: 1300 1114 780 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6310" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb0 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
rtwn0 at pci1 dev 0 function 0 "Realtek 8188CE" rev 0x01: msi
rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address 9c:b7:0d:e1:11:6d
ppb1 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: msi, address
04:7d:7b:31:00:6e
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 0
ppb2 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
rtsx0 at pci3 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 19, AHCI
1.2
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54323, ES2Z> SCSI3 0/direct
fixed naa.5000cca6c7d4a2ff
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 int 16
azalia1: codecs: Conexant/0x506e
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
umass0 at uhub0 port 1 configuration 1 interface 0 " " rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <, , 0.00> SCSI2 0/direct removable
serial.048d11723070200000F0
sd1: 3854MB, 512 bytes/sector, 7892992 sectors
athn0 at uhub0 port 2 configuration 1 interface 0 "ATHEROS USB2.0 WLAN" rev
2.00/1.08 addr 3
uvideo0 at uhub1 port 5 configuration 1 interface 0 "Image Processor Integrated
Camera" rev 2.00/41.64 addr 2
video0 at uvideo0
ugen0 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/7.48
addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 304214MB, 512 bytes/sector, 623032305 sectors
root on sd2a (ddd2f6bca8f0c2cc.a) swap on sd2b dump on sd2b
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
athn0: could not load firmware
