On Wed, Jun 08, 2016 at 03:08:52PM +0200, Gerhard Roth wrote: > I would be glad to hear from some people trying this with a real MBIM > device.
I have a Sierra Wireless EM7455 MBIM device that I purchased with my ThinkPad X260. I am very excited for this driver to make it into OpenBSD. I am a little bit unclear as to how to connect to AT&T wireless in the United States thus far but I want to rule out an error in how I am using the driver. Perhaps I have a similar issue to what sthen@ has. I have been watching the driver discussion on the list and applied the most recent complete patch and then did the following sequence: ifconfig umb0 pin 1234 apn broadband ifconfig umb0 inet 0.0.0.1 0.0.0.2 route add -ifp umb0 default 0.0.0.2 ifconfig umb0 up I don't have a PIN set on this SIM card which seems to be needed? I'm not sure if it's different elsewhere but I've never had a SIM card with a PIN set before here. The output of ifconfig umb0: umb0: flags=8811<UP,POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 index 4 priority 0 roaming disabled registration not registered state open cell-class none SIM not initialized PIN valid (3 attempts left) device EM7455 IMEI 014582000 firmware SWI9X30C_02.08. APN broadband groups: egress status: down inet 0.0.0.1 --> 0.0.0.2 netmask 0xff000000 >From the console: umb0: state going up from 'down' to 'open' umb0: PIN2 state locked (3 attempts left) umb0: SIM not initialized (PIN missing) umb0: SIM not initialized (PIN missing) umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE I'm not totally clear as to whether I have the right firmware by default. I haven't booted up Windows on this system at all and there is different firmware for some carriers (AT&T, Verizon, Spring) listed from Sierra Wireless for this model. Perhaps I need to try with Verizon and see what happens. I also tried with several other apn values that work in some circumstances (wap.cingular, phone) with identical results. Any ideas? Thank you! Bryan OpenBSD 6.0-beta (GENERIC.MP) #1: Wed Jun 8 08:11:28 PDT 2016 r...@x.example.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 17024274432 (16235MB) avail mem = 16503767040 (15739MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xb7c01000 (66 entries) bios0: vendor LENOVO version "R02ET44W (1.17 )" date 01/25/2016 bios0: LENOVO 20F6CTO1WW acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI SSDT SSDT ECDT HPET APIC MCFG SSDT SSDT DBGP DBG2 BOOT BATB SSDT SSDT MSDM DMAR ASF! FPDT UEFI acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) EXP8(S4) PXSX(S4) XHCI(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpihpet0 at acpi0: 23999999 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz, 1097.89 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 23MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz, 926.72 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PTcpu1: failed to identify ,SENSOR,ARATcpu2 at mainbus0 cpu1: 256KB 64b/line 8-way L2 cache : apid 1 (application processor) cpu1: smt 0, core 1, package 0 cpu2: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz, 897.90 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWPcpu2: failed to identify ,PERF,ITSCcpu3 at mainbus0,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT: apid 3 (application processor) ,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu3: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz, 897.90 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSCcpu2: smt 1, core 0, package 0 cpu3: failed to identify ,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PTioapic0 at mainbus0,SENSOR,ARAT : apid 2 pa 0xfec00000cpu3: 256KB 64b/line 8-way L2 cache , version 20, 120 pins cpu3: smt 1, core 1, package 0 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus 2 (EXP1) acpiprt5 at acpi0: bus 4 (EXP3) acpiprt6 at acpi0: bus -1 (EXP4) acpiprt7 at acpi0: bus -1 (EXP5) acpiprt8 at acpi0: bus -1 (EXP8) acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI acpipwrres1 at acpi0: PG00, resource for PEG0 acpipwrres2 at acpi0: PG01, resource for PEG1 acpipwrres3 at acpi0: PG02, resource for PEG2 acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpitz0 at acpi0: critical temperature is 128 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "LEN0071" at acpi0 not configured "LEN2014" at acpi0 not configured "INT3F0D" at acpi0 not configured acpibat0 at acpi0: BAT0 model "45N1113" serial 4020 type LION oem "LGC" acpibat1 at acpi0: BAT1 model "45N1738" serial 2903 type LION oem "LGC" acpiac0 at acpi0: AC unit offline acpithinkpad0 at acpi0 "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT3394" at acpi0 not configured acpivideo0 at acpi0: GFX0 acpivout at acpivideo0 not configured cpu0: Enhanced SpeedStep 1097 MHz: speeds: 2701, 2700, 2600, 2500, 2300, 2100, 1900, 1800, 1600, 1400, 1300, 1100, 800, 700, 600, 400 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08 "Intel HD Graphics 520" rev 0x07 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1 ahci0: port 1: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 850, EXM0> SCSI3 0/direct fixed naa.500253884012b49d sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi pci1 at ppb0 bus 2 rtsx0 at pci1 dev 0 function 0 "Realtek RTS522A Card Reader" rev 0x01: msi sdmmc0 at rtsx0: 4-bit ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi pci2 at ppb1 bus 4 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x3a, msi pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21 "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi azalia0: codecs: Realtek/0x0293, Intel/0x2809, using Realtek/0x0293 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16 iic0 at ichiic0 em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi em0: Hardware Initialization Failed em0: Unable to initialize the hardware isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.1 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb0 at mainbus0 wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) umb0 at uhub0 port 3 configuration 1 interface 12 "Sierra Wireless, Incorporated Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A" rev 2.10/0.06 addr 2 umb0: vers 1.0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd1: 244197MB, 512 bytes/sector, 500116577 sectors root on sd1a (acef1b0856ff7402.a) swap on sd1b dump on sd1b iwm0: hw rev 0x200, fw ver 16.242414.0, address 44:85:00:0f:cf:8a umb0: state going up from 'down' to 'open' umb0: PIN2 state locked (3 attempts left) umb0: SIM not initialized (PIN missing) umb0: SIM not initialized (PIN missing) umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE umb0: state change time out umb0: set/qry MBIM_CID_RADIO_STATE failed: FAILURE