On Mon, Jan 15, 2018 at 01:02:58AM +0100, Mark Kettenis wrote:
> The diff below adopts more of the Linux code to manage i2c
> transactions on hardware supported by inteldrm(4). The i2c stuff is
> reponsible for detecting panels and monitors, so it is somewhat
> important that this works right. And the Linux code developed some
> quirks over the years that my rewrite of the code to use OpenBSD APIs
> didn't have.
>
> So I'm looking for testers. I'm especially interested in tests of
> external displays on all sorts of connector types (VGA, DVI, HDMI,
> DP). It would be really great to get some tests on older stuff with
> (S)DVO. Please let me know if there are regressions or if this fixes
> things that are currently broken. But all reports are welcome.
> Please include a dmesg and some information about the display and
> connector type.
>
No changes on my X1 gen2.
I have a LG 27UD88 connected via HDMI.
On bootup the external monitor comes up (in mirror mode) once inteldrm attaches.
X comes up like this:
-----
Screen 0: minimum 320 x 200, current 6400 x 2160, maximum 8192 x 8192
eDP-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y
axis) 310mm x 174mm
2560x1440 60.00*+
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
1600x1200 60.00
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
800x600 60.00 60.32 56.25
700x525 59.98
640x512 60.02
640x480 60.00 59.94
512x384 60.00
400x300 60.32 56.34
320x240 60.05
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-2 connected 3840x2160+2560+0 (normal left inverted right x axis y axis)
600mm x 340mm
3840x2160 30.00*+ 25.00 24.00 29.97 23.98
2560x1440 59.95
1920x1080 60.00 59.94 30.00 29.97
1920x1080i 60.00 59.94
1600x900 60.00
1280x1024 60.02
1280x800 59.91
1152x864 59.97
1280x720 60.00 59.94
1024x768 60.00
800x600 60.32
720x480 60.00 59.94
640x480 60.00 59.94
-----
and I then switch to HDMI only, which is my normal workstation setup:
-----
Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 8192 x 8192
eDP-1 connected primary (normal left inverted right x axis y axis)
2560x1440 60.00 +
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
1600x1200 60.00
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
800x600 60.00 60.32 56.25
700x525 59.98
640x512 60.02
640x480 60.00 59.94
512x384 60.00
400x300 60.32 56.34
320x240 60.05
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-2 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 600mm
x 340mm
3840x2160 30.00*+ 25.00 24.00 29.97 23.98
2560x1440 59.95
1920x1080 60.00 59.94 30.00 29.97
1920x1080i 60.00 59.94
1600x900 60.00
1280x1024 60.02
1280x800 59.91
1152x864 59.97
1280x720 60.00 59.94
1024x768 60.00
800x600 60.32
720x480 60.00 59.94
640x480 60.00 59.94
-----
DP does not work on this machine with this monitor. Neither without nor with
your diff.
(I have no other monitor to test with and I never investigated why it doesn't
work)
-----
Screen 0: minimum 320 x 200, current 6400 x 2160, maximum 8192 x 8192
eDP-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y
axis) 310mm x 174mm
2560x1440 60.00*+
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
1600x1200 60.00
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
800x600 60.00 60.32 56.25
700x525 59.98
640x512 60.02
640x480 60.00 59.94
512x384 60.00
400x300 60.32 56.34
320x240 60.05
DP-1 connected 3840x2160+2560+0 (normal left inverted right x axis y axis)
600mm x 340mm
3840x2160 60.00*+ 30.00
2560x1440 59.95
1920x1080 60.00 59.94
1600x900 60.00
1280x1024 60.02
1280x800 59.81
1152x864 59.97
1280x720 60.00 59.94
1024x768 60.00
800x600 60.32
720x480 60.00 59.94
640x480 60.00 59.94
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)
-----
The monitor sees when DP is plugged in, it prompts me to switch
inputs, but the screen stays dark. This is true in X and on the
console on boot up.
OpenBSD 6.2-current (GENERIC.MP) #8: Mon Jan 15 18:28:21 CET 2018
flor...@x1.home.narrans.de:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8246063104 (7864MB)
avail mem = 7989219328 (7619MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdcd3d000 (62 entries)
bios0: vendor LENOVO version "GRET54WW (1.31 )" date 12/20/2017
bios0: LENOVO 20A8S18T00
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT
SSDT SSDT PCCT SSDT UEFI MSDM ASF! BATB FPDT UEFI DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz, 1796.17 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpihpet0: recalibrated TSC frequency 2494238221 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz, 1795.85 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz, 1795.85 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz, 1795.85 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpitz0 at acpi0: critical temperature is 200 degC
dwiic0 at acpi0: I2C1 addr 0xfe105000/0x1000 irq 7
iic0 at dwiic0
"CPLM3218" at iic0 addr 0x48 not configured
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0071" at acpi0 not configured
"LEN0034" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1703" serial 407 type LiP oem "SMP"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 1796 MHz: speeds: 2501, 2500, 2400, 2200, 2100, 1900,
1800, 1700, 1600, 1500, 1300, 1200, 1100, 1000, 800, 775 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 2560x1440, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x04: msi, address
54:ee:75:1d:2f:8d
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x83, msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, LITEONIT LGT-256, 2G87> SCSI3 0/direct
fixed t10.ATA_LITEONIT_LGT-256M6G_SD0E97903L1TH45108M7
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic1 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 1 "Texas Instruments Inc.
Texas Instruments USB Billboard Device" rev 2.01/1.00 addr 3
uhidev0: iclass 3/0
uhid0 at uhidev0: input=64, output=64, feature=2
ugen0 at uhub2 port 1 configuration 1 "Texas Instruments Inc. Texas Instruments
USB Billboard Device" rev 2.01/1.00 addr 3
uticom0 at uhub2 port 4 "UART2USB adapter TUSB3410 Boot Device" rev 1.10/0.01
addr 4
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 5
uhidev2: iclass 3/1, 26 report ids
uhid1 at uhidev2 reportid 18: input=0, output=0, feature=1
uhid2 at uhidev2 reportid 23: input=0, output=0, feature=1
ums0 at uhidev2 reportid 26: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhidev3 at uhub0 port 2 configuration 1 interface 2 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 5
uhidev3: iclass 3/0, 39 report ids
uhid3 at uhidev3 reportid 3: input=1, output=0, feature=0
uhid4 at uhidev3 reportid 7: input=7, output=0, feature=0
uhid5 at uhidev3 reportid 32: input=0, output=0, feature=18
uhid6 at uhidev3 reportid 33: input=2, output=0, feature=0
uhid7 at uhidev3 reportid 34: input=0, output=0, feature=26
uhid8 at uhidev3 reportid 35: input=0, output=0, feature=26
uhid9 at uhidev3 reportid 36: input=0, output=0, feature=31
uhid10 at uhidev3 reportid 37: input=0, output=0, feature=31
uhid11 at uhidev3 reportid 38: input=0, output=0, feature=31
uhid12 at uhidev3 reportid 39: input=31, output=0, feature=0
ugen1 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev
1.10/0.78 addr 6
ugen2 at uhub0 port 7 "Intel product 0x07dc" rev 2.00/0.01 addr 7
uhub3 at uhub0 port 10 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 8
uhub4 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.04 addr 2
uhidev4 at uhub4 port 5 configuration 1 interface 0 "ELAN Touchscreen" rev
2.00/0.13 addr 3
uhidev4: iclass 3/0, 68 report ids
ums1 at uhidev4 reportid 1: 1 button, tip
wsmouse3 at ums1 mux 0
uhid13 at uhidev4 reportid 2: input=64, output=0, feature=0
uhid14 at uhidev4 reportid 3: input=0, output=31, feature=0
uhid15 at uhidev4 reportid 4: input=19, output=0, feature=0
uhid16 at uhidev4 reportid 10: input=0, output=0, feature=1
ums2 at uhidev4 reportid 68
ums2: mouse has no X report
uvideo0 at uhub4 port 8 configuration 1 interface 0 "Chicony Electronics
Co.,Ltd. Integrated Camera" rev 2.00/25.09 addr 4
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 244190MB, 512 bytes/sector, 500102858 sectors
root on sd1a (5b47e9eb5dc9d758.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x140, fw ver 16.242414.0, address e8:2a:ea:7b:66:3c
ucom0 at uticom0
--
I'm not entirely sure you are real.
