Update on this: Silicom support responded promptly, asked sensible
questions, didn't immediately bail on the fact that I'm not running a
supported OS, and prepared an update (to run under Linux but the
Debian live image worked fine for this).
ixl0 at pci6 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 1, FW 7.0.50775
API 1.8, msix, 4 queues, address 00:e0:ed:75:a5:5c
ixl1 at pci6 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 0, FW 7.0.50775
API 1.8, msix, 4 queues, address 00:e0:ed:75:a5:5d
ixl2 at pci6 dev 0 function 2 "Intel X710 SFP+" rev 0x02: port 2, FW 7.0.50775
API 1.8, msix, 4 queues, address 00:e0:ed:75:a5:5e
ixl3 at pci6 dev 0 function 3 "Intel X710 SFP+" rev 0x02: port 3, FW 7.0.50775
API 1.8, msix, 4 queues, address 00:e0:ed:75:a5:5f
ixl3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:e0:ed:75:a5:5f
index 6 priority 0 llprio 3
media: Ethernet autoselect (10GbaseLR full-duplex)
status: active
transceiver: SFP LC, 1310 nm, 10.0km SMF
model: FLEXOPTIX P.1396.10 rev A
serial: F78R21S, date: 2018-07-09
voltage: 3.30 V, bias current: 32.07 mA
temp: 29.43 C (low -25.00 C, high 90.00 C)
tx: -2.63 dBm (low -7.00 dBm, high 2.50 dBm)
rx: -4.75 dBm (low -16.00 dBm, high 1.00 dBm)
On 2020/07/08 22:59, Stuart Henderson wrote:
> I have some ixl cards which show "unable to query phy types" at
> attach time, and return either EIO or ENODEV if I try fetching sff
> pages.
>
> I booted with SFP+ in all ixl ports and have this:
>
> ixl0 at pci6 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 1, FW
> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5c
> ixl0: unable to query phy types
> ixl1 at pci6 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 0, FW
> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5d
> ixl1: unable to query phy types
> ixl2 at pci6 dev 0 function 2 "Intel X710 SFP+" rev 0x02: port 2, FW
> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5e
> ixl2: unable to query phy types
> ixl3 at pci6 dev 0 function 3 "Intel X710 SFP+" rev 0x02: port 3, FW
> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5f
> ixl3: unable to query phy types
>
> # ifconfig ixl sff
> ixl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:e0:ed:75:a5:5c
> index 3 priority 0 llprio 3
> media: Ethernet autoselect
> status: no carrier
> ifconfig: ixl0 transceiver: Input/output error
> ixl1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:e0:ed:75:a5:5d
> index 4 priority 0 llprio 3
> media: Ethernet autoselect
> status: no carrier
> ifconfig: ixl1 transceiver: Input/output error
> ixl2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:e0:ed:75:a5:5e
> index 5 priority 0 llprio 3
> media: Ethernet autoselect (10GbaseLR full-duplex)
> status: active
> ifconfig: ixl2 transceiver: Operation not supported by device
> ixl3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:e0:ed:75:a5:5f
> index 6 priority 0 llprio 3
> media: Ethernet autoselect
> status: no carrier
> ifconfig: ixl3 transceiver: Input/output error
>
> With "ifconfig ixlX debug" set, I get this on the interface
>
> ixl2: ixl_sff_get_byte(dev 0xa0, reg 0x7f) -> 0003
>
> Firmware on these are a bit older than the Intel cards that I've seen
> so my first thought is to try updating, I've mailed Silicom to ask them
> if they can provide anything newer (Intel's own downloads say not to
> use them for non Intel-branded cards and I don't really want to
> brick a card..), does anyone have other ideas while I'm waiting to
> hear back from them?
>
>
> OpenBSD 6.7-current (GENERIC.MP) #337: Wed Jul 8 10:37:10 MDT 2020
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8464842752 (8072MB)
> avail mem = 8193245184 (7813MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xed9b0 (46 entries)
> bios0: vendor American Megatrends Inc. version "1.3" date 03/19/2018
> bios0: Supermicro Super Server
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S4 S5
> acpi0: tables DSDT FACP APIC FPDT FIDT SPMI MCFG UEFI DBG2 HPET WDDT SSDT
> SSDT SSDT PRAD DMAR HEST BERT ERST EINJ
> acpi0: wakeup devices IP2P(S4) EHC1(S4) EHC2(S4) RP07(S4) RP08(S4) BR1A(S4)
> BR1B(S4) BR2A(S4) BR2B(S4) BR2C(S4) BR2D(S4) BR3A(S4) BR3B(S4) BR3C(S4)
> BR3D(S4) RP01(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.27 MHz, 06-56-03
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: TSC skew=0 observed drift=0
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.01 MHz, 06-56-03
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: TSC skew=4 observed drift=0
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: TSC skew=2 observed drift=0
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: TSC skew=30 observed drift=0
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 1 (application processor)
> cpu4: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> cpu4:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: TSC skew=-10 observed drift=0
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0: apid 3 (application processor)
> cpu5: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> cpu5:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: TSC skew=0 observed drift=0
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0: apid 5 (application processor)
> cpu6: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> cpu6:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: TSC skew=-6 observed drift=0
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> cpu7:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: TSC skew=14 observed drift=0
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0x80000000, bus 0-255
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 255 (UNC0)
> acpiprt1 at acpi0: bus 0 (PCI0)
> acpiprt2 at acpi0: bus 1 (BR1A)
> acpiprt3 at acpi0: bus 2 (BR1B)
> acpiprt4 at acpi0: bus 4 (BR2C)
> acpiprt5 at acpi0: bus 5 (BR3A)
> acpiprt6 at acpi0: bus 7 (RP01)
> acpiprt7 at acpi0: bus 8 (RP02)
> acpiprt8 at acpi0: bus 9 (RP04)
> acpiprt9 at acpi0: bus 10 (BR3A)
> acpiprt10 at acpi0: bus 11 (RP05)
> acpicpu0 at acpi0: C1(1000@1 halt), PSS
> acpicpu1 at acpi0: C1(1000@1 halt), PSS
> acpicpu2 at acpi0: C1(1000@1 halt), PSS
> acpicpu3 at acpi0: C1(1000@1 halt), PSS
> acpicpu4 at acpi0: C1(1000@1 halt), PSS
> acpicpu5 at acpi0: C1(1000@1 halt), PSS
> acpicpu6 at acpi0: C1(1000@1 halt), PSS
> acpicpu7 at acpi0: C1(1000@1 halt), PSS
> acpipci0 at acpi0 UNC0: 0x00000010 0x00000011 0x00000000
> extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
> 0x0 - 0xfe
> extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
> 0x0 - 0xffffffff
> extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
> 0x0 - 0xffffffffffffffff
> "ACPI0004" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "PNP0C33" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpipci1 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
> extent `acpipci1 pcibus' (0x0 - 0xff), flags=0
> 0xff - 0xff
> extent `acpipci1 pciio' (0x0 - 0xffffffff), flags=0
> 0xcf8 - 0xfff
> 0x10000 - 0xffffffff
> extent `acpipci1 pcimem' (0x0 - 0xffffffffffffffff), flags=0
> 0x0 - 0x9ffff
> 0xc0000 - 0x8fffffff
> 0xfbffc000 - 0xffffffffffffffff
> "PNP0003" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpicmos0 at acpi0
> "IPI0001" at acpi0 not configured
> acpibtn0 at acpi0: PWRB
> ipmi at mainbus0 not configured
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 2200 MHz: speeds: 2200, 2100, 2000, 1900, 1800,
> 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
> pci0 at mainbus0 bus 255
> "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 0 not configured
> "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 1 not configured
> "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 2 not configured
> "Intel Xeon-D QPI Debug" rev 0x03 at pci0 dev 11 function 3 not configured
> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 0 not configured
> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 1 not configured
> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 2 not configured
> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 3 not configured
> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 0 not configured
> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 4 not configured
> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 5 not configured
> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 6 not configured
> "Intel Xeon-D PCIE" rev 0x03 at pci0 dev 16 function 0 not configured
> "Intel E5 v4 R2PCIe Agent" rev 0x03 at pci0 dev 16 function 1 not configured
> "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 5 not configured
> "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 6 not configured
> "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 7 not configured
> "Intel Xeon-D Home Agent" rev 0x03 at pci0 dev 18 function 0 not configured
> "Intel Xeon-D Home Agent" rev 0x03 at pci0 dev 18 function 1 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 0 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 1 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 2 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 3 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 4 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 5 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 6 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 7 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 0 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 1 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 2 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 3 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 4 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 5 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 6 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 7 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 0 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 1 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 2 not configured
> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 3 not configured
> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 0 not configured
> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 1 not configured
> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 2 not configured
> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 3 not configured
> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 4 not configured
> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 31 function 0 not configured
> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 31 function 2 not configured
> pci1 at mainbus0 bus 0
> pchb0 at pci1 dev 0 function 0 "Intel Xeon-D Host" rev 0x03
> ppb0 at pci1 dev 1 function 0 "Intel Xeon-D PCIE" rev 0x03
> pci2 at ppb0 bus 1
> ppb1 at pci1 dev 1 function 1 "Intel Xeon-D PCIE" rev 0x03
> pci3 at ppb1 bus 2
> ppb2 at pci1 dev 2 function 0 "Intel Xeon-D PCIE" rev 0x03
> pci4 at ppb2 bus 3
> "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 0 not configured
> "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 1 not configured
> "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 2 not configured
> "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 3 not configured
> ppb3 at pci1 dev 2 function 2 "Intel Xeon-D PCIE" rev 0x03
> pci5 at ppb3 bus 4
> ix0 at pci5 dev 0 function 0 "Intel X552 SFP+" rev 0x00: msi, address
> ac:1f:6b:6a:8b:f0
> ix1 at pci5 dev 0 function 1 "Intel X552 SFP+" rev 0x00: msi, address
> ac:1f:6b:6a:8b:f1
> ppb4 at pci1 dev 3 function 0 "Intel Xeon-D PCIE" rev 0x03: msi
> pci6 at ppb4 bus 5
> ixl0 at pci6 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 1, FW
> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5c
> ixl0: unable to query phy types
> ixl1 at pci6 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 0, FW
> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5d
> ixl1: unable to query phy types
> ixl2 at pci6 dev 0 function 2 "Intel X710 SFP+" rev 0x02: port 2, FW
> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5e
> ixl2: unable to query phy types
> ixl3 at pci6 dev 0 function 3 "Intel X710 SFP+" rev 0x02: port 3, FW
> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5f
> ixl3: unable to query phy types
> ppb5 at pci1 dev 3 function 2 "Intel Xeon-D PCIE" rev 0x03
> pci7 at ppb5 bus 6
> "Intel Xeon-D Address Map" rev 0x03 at pci1 dev 5 function 0 not configured
> "Intel Xeon-D Hot Plug" rev 0x03 at pci1 dev 5 function 1 not configured
> "Intel Xeon-D RAS" rev 0x03 at pci1 dev 5 function 2 not configured
> xhci0 at pci1 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
> addr 1
> "Intel 8 Series MEI" rev 0x04 at pci1 dev 22 function 0 not configured
> "Intel 8 Series MEI" rev 0x04 at pci1 dev 22 function 1 not configured
> ehci0 at pci1 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 18
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> ppb6 at pci1 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
> pci8 at ppb6 bus 7
> em0 at pci8 dev 0 function 0 "Intel I210" rev 0x03: msi, address
> ac:1f:6b:6a:88:64
> ppb7 at pci1 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd5: msi
> pci9 at ppb7 bus 8
> em1 at pci9 dev 0 function 0 "Intel I210" rev 0x03: msi, address
> ac:1f:6b:6a:88:65
> ppb8 at pci1 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi
> pci10 at ppb8 bus 9
> ppb9 at pci10 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03
> pci11 at ppb9 bus 10
> vga1 at pci11 dev 0 function 0 "ASPEED Technology AST2000" rev 0x30
> wsdisplay at vga1 not configured
> ppb10 at pci1 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd5: msi
> pci12 at ppb10 bus 11
> em2 at pci12 dev 0 function 0 "Intel I350" rev 0x01: msi, address
> ac:1f:6b:6a:88:66
> em3 at pci12 dev 0 function 1 "Intel I350" rev 0x01: msi, address
> ac:1f:6b:6a:88:67
> em4 at pci12 dev 0 function 2 "Intel I350" rev 0x01: msi, address
> ac:1f:6b:6a:88:68
> em5 at pci12 dev 0 function 3 "Intel I350" rev 0x01: msi, address
> ac:1f:6b:6a:88:69
> ehci1 at pci1 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 18
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> pcib0 at pci1 dev 31 function 0 "Intel C224 LPC" rev 0x05
> ahci0 at pci1 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3
> ahci0: port 4: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 4 lun 0: <ATA, PLEXTOR PX-128S3, 1.04>
> naa.50023031011e8059
> sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
> ichiic0 at pci1 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 int
> 18
> iic0 at ichiic0
> "Intel 8 Series Thermal" rev 0x05 at pci1 dev 31 function 6 not configured
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> uhub3 at uhub0 port 3 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
> rev 2.00/32.98 addr 2
> uhub4 at uhub3 port 2 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
> rev 2.00/32.98 addr 3
> uhub5 at uhub0 port 4 configuration 1 interface 0 "ATEN International product
> 0x7000" rev 2.00/0.00 addr 4
> uhidev0 at uhub5 port 1 configuration 1 interface 0 "ATEN International
> product 0x2419" rev 1.10/1.00 addr 5
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0 mux 1
> uhidev1 at uhub5 port 1 configuration 1 interface 1 "ATEN International
> product 0x2419" rev 1.10/1.00 addr 5
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhub6 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.05 addr 2
> uhub7 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.05 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (ece891224464e50c.a) swap on sd0b dump on sd0b
>
