ok.

so the problem is the older api doenst support the "get phy types" command, or 
the sff commands. should we silence the "get phy types" error output? is there 
a better errno to use when the sff command isn't supported? should we add 
something to the manpage? should that something be "i'm not angry, just 
disappointed"?

> On 9 Jul 2020, at 10:36 pm, Stuart Henderson <s...@spacehopper.org> wrote:
> 
> Update on this: Silicom support responded promptly, asked sensible
> questions, didn't immediately bail on the fact that I'm not running a
> supported OS, and prepared an update (to run under Linux but the
> Debian live image worked fine for this).
> 
> ixl0 at pci6 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 1, FW 
> 7.0.50775 API 1.8, msix, 4 queues, address 00:e0:ed:75:a5:5c
> ixl1 at pci6 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 0, FW 
> 7.0.50775 API 1.8, msix, 4 queues, address 00:e0:ed:75:a5:5d
> ixl2 at pci6 dev 0 function 2 "Intel X710 SFP+" rev 0x02: port 2, FW 
> 7.0.50775 API 1.8, msix, 4 queues, address 00:e0:ed:75:a5:5e
> ixl3 at pci6 dev 0 function 3 "Intel X710 SFP+" rev 0x02: port 3, FW 
> 7.0.50775 API 1.8, msix, 4 queues, address 00:e0:ed:75:a5:5f
> 
> ixl3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>        lladdr 00:e0:ed:75:a5:5f
>        index 6 priority 0 llprio 3
>        media: Ethernet autoselect (10GbaseLR full-duplex)
>        status: active
>        transceiver: SFP LC, 1310 nm, 10.0km SMF
>        model: FLEXOPTIX P.1396.10 rev A
>        serial: F78R21S, date: 2018-07-09
>        voltage: 3.30 V, bias current: 32.07 mA
>        temp: 29.43 C (low -25.00 C, high 90.00 C)
>        tx: -2.63 dBm (low -7.00 dBm, high 2.50 dBm)
>        rx: -4.75 dBm (low -16.00 dBm, high 1.00 dBm)
> 
> 
> 
> On 2020/07/08 22:59, Stuart Henderson wrote:
>> I have some ixl cards which show "unable to query phy types" at
>> attach time, and return either EIO or ENODEV if I try fetching sff
>> pages.
>> 
>> I booted with SFP+ in all ixl ports and have this:
>> 
>> ixl0 at pci6 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 1, FW 
>> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5c
>> ixl0: unable to query phy types
>> ixl1 at pci6 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 0, FW 
>> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5d
>> ixl1: unable to query phy types
>> ixl2 at pci6 dev 0 function 2 "Intel X710 SFP+" rev 0x02: port 2, FW 
>> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5e
>> ixl2: unable to query phy types
>> ixl3 at pci6 dev 0 function 3 "Intel X710 SFP+" rev 0x02: port 3, FW 
>> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5f
>> ixl3: unable to query phy types
>> 
>> # ifconfig ixl sff
>> ixl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>>        lladdr 00:e0:ed:75:a5:5c
>>        index 3 priority 0 llprio 3
>>        media: Ethernet autoselect
>>        status: no carrier
>> ifconfig: ixl0 transceiver: Input/output error
>> ixl1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>>        lladdr 00:e0:ed:75:a5:5d
>>        index 4 priority 0 llprio 3
>>        media: Ethernet autoselect
>>        status: no carrier
>> ifconfig: ixl1 transceiver: Input/output error
>> ixl2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>>        lladdr 00:e0:ed:75:a5:5e
>>        index 5 priority 0 llprio 3
>>        media: Ethernet autoselect (10GbaseLR full-duplex)
>>        status: active
>> ifconfig: ixl2 transceiver: Operation not supported by device
>> ixl3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>>        lladdr 00:e0:ed:75:a5:5f
>>        index 6 priority 0 llprio 3
>>        media: Ethernet autoselect
>>        status: no carrier
>> ifconfig: ixl3 transceiver: Input/output error
>> 
>> With "ifconfig ixlX debug" set, I get this on the interface
>> 
>> ixl2: ixl_sff_get_byte(dev 0xa0, reg 0x7f) -> 0003
>> 
>> Firmware on these are a bit older than the Intel cards that I've seen
>> so my first thought is to try updating, I've mailed Silicom to ask them
>> if they can provide anything newer (Intel's own downloads say not to
>> use them for non Intel-branded cards and I don't really want to
>> brick a card..), does anyone have other ideas while I'm waiting to
>> hear back from them?
>> 
>> 
>> OpenBSD 6.7-current (GENERIC.MP) #337: Wed Jul  8 10:37:10 MDT 2020
>>    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 8464842752 (8072MB)
>> avail mem = 8193245184 (7813MB)
>> random: good seed from bootblocks
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xed9b0 (46 entries)
>> bios0: vendor American Megatrends Inc. version "1.3" date 03/19/2018
>> bios0: Supermicro Super Server
>> acpi0 at bios0: ACPI 5.0
>> acpi0: sleep states S0 S4 S5
>> acpi0: tables DSDT FACP APIC FPDT FIDT SPMI MCFG UEFI DBG2 HPET WDDT SSDT 
>> SSDT SSDT PRAD DMAR HEST BERT ERST EINJ
>> acpi0: wakeup devices IP2P(S4) EHC1(S4) EHC2(S4) RP07(S4) RP08(S4) BR1A(S4) 
>> BR1B(S4) BR2A(S4) BR2B(S4) BR2C(S4) BR2D(S4) BR3A(S4) BR3B(S4) BR3C(S4) 
>> BR3D(S4) RP01(S4) [...]
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.27 MHz, 06-56-03
>> cpu0: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
>> cpu0: 256KB 64b/line 8-way L2 cache
>> cpu0: TSC skew=0 observed drift=0
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 99MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.1.2, IBE
>> cpu1 at mainbus0: apid 2 (application processor)
>> cpu1: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.01 MHz, 06-56-03
>> cpu1: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
>> cpu1: 256KB 64b/line 8-way L2 cache
>> cpu1: TSC skew=4 observed drift=0
>> cpu1: smt 0, core 1, package 0
>> cpu2 at mainbus0: apid 4 (application processor)
>> cpu2: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
>> cpu2: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
>> cpu2: 256KB 64b/line 8-way L2 cache
>> cpu2: TSC skew=2 observed drift=0
>> cpu2: smt 0, core 2, package 0
>> cpu3 at mainbus0: apid 6 (application processor)
>> cpu3: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
>> cpu3: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
>> cpu3: 256KB 64b/line 8-way L2 cache
>> cpu3: TSC skew=30 observed drift=0
>> cpu3: smt 0, core 3, package 0
>> cpu4 at mainbus0: apid 1 (application processor)
>> cpu4: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
>> cpu4: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
>> cpu4: 256KB 64b/line 8-way L2 cache
>> cpu4: TSC skew=-10 observed drift=0
>> cpu4: smt 1, core 0, package 0
>> cpu5 at mainbus0: apid 3 (application processor)
>> cpu5: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
>> cpu5: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
>> cpu5: 256KB 64b/line 8-way L2 cache
>> cpu5: TSC skew=0 observed drift=0
>> cpu5: smt 1, core 1, package 0
>> cpu6 at mainbus0: apid 5 (application processor)
>> cpu6: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
>> cpu6: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
>> cpu6: 256KB 64b/line 8-way L2 cache
>> cpu6: TSC skew=-6 observed drift=0
>> cpu6: smt 1, core 2, package 0
>> cpu7 at mainbus0: apid 7 (application processor)
>> cpu7: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
>> cpu7: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
>> cpu7: 256KB 64b/line 8-way L2 cache
>> cpu7: TSC skew=14 observed drift=0
>> cpu7: smt 1, core 3, package 0
>> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
>> acpimcfg0 at acpi0
>> acpimcfg0: addr 0x80000000, bus 0-255
>> acpihpet0 at acpi0: 14318179 Hz
>> acpiprt0 at acpi0: bus 255 (UNC0)
>> acpiprt1 at acpi0: bus 0 (PCI0)
>> acpiprt2 at acpi0: bus 1 (BR1A)
>> acpiprt3 at acpi0: bus 2 (BR1B)
>> acpiprt4 at acpi0: bus 4 (BR2C)
>> acpiprt5 at acpi0: bus 5 (BR3A)
>> acpiprt6 at acpi0: bus 7 (RP01)
>> acpiprt7 at acpi0: bus 8 (RP02)
>> acpiprt8 at acpi0: bus 9 (RP04)
>> acpiprt9 at acpi0: bus 10 (BR3A)
>> acpiprt10 at acpi0: bus 11 (RP05)
>> acpicpu0 at acpi0: C1(1000@1 halt), PSS
>> acpicpu1 at acpi0: C1(1000@1 halt), PSS
>> acpicpu2 at acpi0: C1(1000@1 halt), PSS
>> acpicpu3 at acpi0: C1(1000@1 halt), PSS
>> acpicpu4 at acpi0: C1(1000@1 halt), PSS
>> acpicpu5 at acpi0: C1(1000@1 halt), PSS
>> acpicpu6 at acpi0: C1(1000@1 halt), PSS
>> acpicpu7 at acpi0: C1(1000@1 halt), PSS
>> acpipci0 at acpi0 UNC0: 0x00000010 0x00000011 0x00000000
>> extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
>>     0x0 - 0xfe
>> extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
>>     0x0 - 0xffffffff
>> extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
>>     0x0 - 0xffffffffffffffff
>> "ACPI0004" at acpi0 not configured
>> "ACPI0007" at acpi0 not configured
>> "ACPI0007" at acpi0 not configured
>> "ACPI0007" at acpi0 not configured
>> "ACPI0007" at acpi0 not configured
>> "ACPI0007" at acpi0 not configured
>> "ACPI0007" at acpi0 not configured
>> "ACPI0007" at acpi0 not configured
>> "ACPI0007" at acpi0 not configured
>> "PNP0C33" at acpi0 not configured
>> "PNP0C14" at acpi0 not configured
>> acpipci1 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
>> extent `acpipci1 pcibus' (0x0 - 0xff), flags=0
>>     0xff - 0xff
>> extent `acpipci1 pciio' (0x0 - 0xffffffff), flags=0
>>     0xcf8 - 0xfff
>>     0x10000 - 0xffffffff
>> extent `acpipci1 pcimem' (0x0 - 0xffffffffffffffff), flags=0
>>     0x0 - 0x9ffff
>>     0xc0000 - 0x8fffffff
>>     0xfbffc000 - 0xffffffffffffffff
>> "PNP0003" at acpi0 not configured
>> "PNP0C14" at acpi0 not configured
>> acpicmos0 at acpi0
>> "IPI0001" at acpi0 not configured
>> acpibtn0 at acpi0: PWRB
>> ipmi at mainbus0 not configured
>> cpu0: using VERW MDS workaround (except on vmm entry)
>> cpu0: Enhanced SpeedStep 2200 MHz: speeds: 2200, 2100, 2000, 1900, 1800, 
>> 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
>> pci0 at mainbus0 bus 255
>> "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 0 not configured
>> "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 1 not configured
>> "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 2 not configured
>> "Intel Xeon-D QPI Debug" rev 0x03 at pci0 dev 11 function 3 not configured
>> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 0 not configured
>> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 1 not configured
>> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 2 not configured
>> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 3 not configured
>> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 0 not configured
>> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 4 not configured
>> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 5 not configured
>> "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 6 not configured
>> "Intel Xeon-D PCIE" rev 0x03 at pci0 dev 16 function 0 not configured
>> "Intel E5 v4 R2PCIe Agent" rev 0x03 at pci0 dev 16 function 1 not configured
>> "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 5 not configured
>> "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 6 not configured
>> "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 7 not configured
>> "Intel Xeon-D Home Agent" rev 0x03 at pci0 dev 18 function 0 not configured
>> "Intel Xeon-D Home Agent" rev 0x03 at pci0 dev 18 function 1 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 0 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 1 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 2 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 3 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 4 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 5 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 6 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 7 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 0 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 1 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 2 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 3 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 4 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 5 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 6 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 7 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 0 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 1 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 2 not configured
>> "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 3 not configured
>> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 0 not configured
>> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 1 not configured
>> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 2 not configured
>> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 3 not configured
>> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 4 not configured
>> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 31 function 0 not configured
>> "Intel Xeon-D PCU" rev 0x03 at pci0 dev 31 function 2 not configured
>> pci1 at mainbus0 bus 0
>> pchb0 at pci1 dev 0 function 0 "Intel Xeon-D Host" rev 0x03
>> ppb0 at pci1 dev 1 function 0 "Intel Xeon-D PCIE" rev 0x03
>> pci2 at ppb0 bus 1
>> ppb1 at pci1 dev 1 function 1 "Intel Xeon-D PCIE" rev 0x03
>> pci3 at ppb1 bus 2
>> ppb2 at pci1 dev 2 function 0 "Intel Xeon-D PCIE" rev 0x03
>> pci4 at ppb2 bus 3
>> "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 0 not configured
>> "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 1 not configured
>> "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 2 not configured
>> "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 3 not configured
>> ppb3 at pci1 dev 2 function 2 "Intel Xeon-D PCIE" rev 0x03
>> pci5 at ppb3 bus 4
>> ix0 at pci5 dev 0 function 0 "Intel X552 SFP+" rev 0x00: msi, address 
>> ac:1f:6b:6a:8b:f0
>> ix1 at pci5 dev 0 function 1 "Intel X552 SFP+" rev 0x00: msi, address 
>> ac:1f:6b:6a:8b:f1
>> ppb4 at pci1 dev 3 function 0 "Intel Xeon-D PCIE" rev 0x03: msi
>> pci6 at ppb4 bus 5
>> ixl0 at pci6 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 1, FW 
>> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5c
>> ixl0: unable to query phy types
>> ixl1 at pci6 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 0, FW 
>> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5d
>> ixl1: unable to query phy types
>> ixl2 at pci6 dev 0 function 2 "Intel X710 SFP+" rev 0x02: port 2, FW 
>> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5e
>> ixl2: unable to query phy types
>> ixl3 at pci6 dev 0 function 3 "Intel X710 SFP+" rev 0x02: port 3, FW 
>> 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5f
>> ixl3: unable to query phy types
>> ppb5 at pci1 dev 3 function 2 "Intel Xeon-D PCIE" rev 0x03
>> pci7 at ppb5 bus 6
>> "Intel Xeon-D Address Map" rev 0x03 at pci1 dev 5 function 0 not configured
>> "Intel Xeon-D Hot Plug" rev 0x03 at pci1 dev 5 function 1 not configured
>> "Intel Xeon-D RAS" rev 0x03 at pci1 dev 5 function 2 not configured
>> xhci0 at pci1 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI 1.0
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 
>> 3.00/1.00 addr 1
>> "Intel 8 Series MEI" rev 0x04 at pci1 dev 22 function 0 not configured
>> "Intel 8 Series MEI" rev 0x04 at pci1 dev 22 function 1 not configured
>> ehci0 at pci1 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 18
>> usb1 at ehci0: USB revision 2.0
>> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 
>> 2.00/1.00 addr 1
>> ppb6 at pci1 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
>> pci8 at ppb6 bus 7
>> em0 at pci8 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
>> ac:1f:6b:6a:88:64
>> ppb7 at pci1 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd5: msi
>> pci9 at ppb7 bus 8
>> em1 at pci9 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
>> ac:1f:6b:6a:88:65
>> ppb8 at pci1 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi
>> pci10 at ppb8 bus 9
>> ppb9 at pci10 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03
>> pci11 at ppb9 bus 10
>> vga1 at pci11 dev 0 function 0 "ASPEED Technology AST2000" rev 0x30
>> wsdisplay at vga1 not configured
>> ppb10 at pci1 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd5: msi
>> pci12 at ppb10 bus 11
>> em2 at pci12 dev 0 function 0 "Intel I350" rev 0x01: msi, address 
>> ac:1f:6b:6a:88:66
>> em3 at pci12 dev 0 function 1 "Intel I350" rev 0x01: msi, address 
>> ac:1f:6b:6a:88:67
>> em4 at pci12 dev 0 function 2 "Intel I350" rev 0x01: msi, address 
>> ac:1f:6b:6a:88:68
>> em5 at pci12 dev 0 function 3 "Intel I350" rev 0x01: msi, address 
>> ac:1f:6b:6a:88:69
>> ehci1 at pci1 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 18
>> usb2 at ehci1: USB revision 2.0
>> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 
>> 2.00/1.00 addr 1
>> pcib0 at pci1 dev 31 function 0 "Intel C224 LPC" rev 0x05
>> ahci0 at pci1 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3
>> ahci0: port 4: 6.0Gb/s
>> scsibus1 at ahci0: 32 targets
>> sd0 at scsibus1 targ 4 lun 0: <ATA, PLEXTOR PX-128S3, 1.04> 
>> naa.50023031011e8059
>> sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
>> ichiic0 at pci1 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 
>> int 18
>> iic0 at ichiic0
>> "Intel 8 Series Thermal" rev 0x05 at pci1 dev 31 function 6 not configured
>> isa0 at pcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com0: console
>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> vmm0 at mainbus0: VMX/EPT
>> uhub3 at uhub0 port 3 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" 
>> rev 2.00/32.98 addr 2
>> uhub4 at uhub3 port 2 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" 
>> rev 2.00/32.98 addr 3
>> uhub5 at uhub0 port 4 configuration 1 interface 0 "ATEN International 
>> product 0x7000" rev 2.00/0.00 addr 4
>> uhidev0 at uhub5 port 1 configuration 1 interface 0 "ATEN International 
>> product 0x2419" rev 1.10/1.00 addr 5
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0: 8 variable keys, 6 key codes
>> wskbd0 at ukbd0 mux 1
>> uhidev1 at uhub5 port 1 configuration 1 interface 1 "ATEN International 
>> product 0x2419" rev 1.10/1.00 addr 5
>> uhidev1: iclass 3/1
>> ums0 at uhidev1: 3 buttons, Z dir
>> wsmouse0 at ums0 mux 0
>> uhub6 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" 
>> rev 2.00/0.05 addr 2
>> uhub7 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" 
>> rev 2.00/0.05 addr 2
>> vscsi0 at root
>> scsibus2 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus3 at softraid0: 256 targets
>> root on sd0a (ece891224464e50c.a) swap on sd0b dump on sd0b
>> 
> 

Reply via email to