Actually there are ways around that. With the Mac you can find the up/down buttons, turn cursor tracking off and vo-space on the up/down buttons respectively to tune up and down the band in the appropriate steps depending on where you are in the spectrum. You also have other options you can click on in the same way say using +/-100KH~ or +/-1KHZ steps. If you’re using a Windows sScreen reader then you have to make sure that the Focus doesn’t move back to the frequency entry box and how you do that depends on which Screen reader you’re using. If you use JAWS then you can simulate a mouse click in JAWS Cursor mode to use the controls on the SDR.
> On 6 Mar 2018, at 5:40 am, The wolf <[email protected]> wrote: > > I did also email the folks who make the software for that and they are aware > of there needing to be a > way to tune up via the band tuning up and down the band using the keyboard > as it stands now you can only inter in frequencies > On 3/5/2018 5:51 AM, Dane Trethowan wrote: >> Hi! >> I’ve spoken on list of the Kiwi Network SDR setup which I’ll be purchasing >> and setting up - Finally! - next month. >> I’ll be keeping a log of my setup as I go through with it so in the meantime >> I’ve done a little Googling and found a review of the Kiwi SDR package which >> should straighten things out for those list members who either don’t know >> what I’m talking about or who wish to catch the Kiwi SDR fever themselves, >> enjoy! >> >> >>> https://www.rtl-sdr.com/a-review-of-the-kiwisdr-10-khz-30-mhz-wideband-network-sdr/ >>> >>> <https://www.rtl-sdr.com/a-review-of-the-kiwisdr-10-khz-30-mhz-wideband-network-sdr/> >> >> >> ********** >> Those of a positive and enquiring frame of mind will leave the rest of the >> halfwits in this world behind. >> >> >> >
