If this set has a two tuner PIP, set both tuners to the same channel and display the PIP. Does this make a difference?
Dominic, DiLeo Atlantic TV Freeport, Maine ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In a message dated 2/25/04 8:36:19 AM Eastern Standard Time, [EMAIL PROTECTED] writes: > have this D52W20BYX1 chassis ITC222 that the video tears on the sides > mostly especially the left side and there is a vertical noise bar floating > across the screen from the left to the right. The vertical noise bar is > worst on channel 4 and goes down in intensity as you go up or down in > channels and is not present above channel 6 or video inputs. > After a few hours chasing this I noticed an adjacent TV has the vertical > noise bar floating across the screen when this D52W20BYX1 has a picture > only. If I put the D52W20BYX1 on a blank video input there is no noise bar > on the adjacent set. When I turn the D52W20BYX1 on there is no noise bar on > the adjacent set till the D52W20BYX1 shows video. > As usual TCE has no reports of this. (SURPRISE). Any of you guys seen this > or have any suggestions? > > > Robert J. Delhommer, Sr. > Bob's TV > P.O. Box 40 / 212 W. Lafayette St. > Maurice, LA 70555 > _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
