Does anyone have a schematic on this unit? All my S/B voltages appear to be correct and when I press power, some of my voltages increase, as if the unit is running, but never turns on. This set has no relay. On FBT, my B+ is 136.7, when I press power, it goes to 140v. The 180v line is only at 140v..so I need a schematic. I checked the FET with a new one and it seems fine. I disconnected the HOT..still no power. Disconnected the CRT board, yoke..no luck. Voltages on CRT also seem to be what they should be in run..but set won't turn on. Thank you.
Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Intrepid Video Support" <[EMAIL PROTECTED]> To: "Tech List" <[EMAIL PROTECTED]> Sent: Monday, March 22, 2004 5:37 PM Subject: [Techs] TA Orion TV1934 dead(2002) This is a 2002 model, unit dead. Customer stated there was no video..but when I apply power, I hear was sounds like the SM start, power button has no effect(figures). B+ =140vd..checked many diodes, resistors and can find no problems. I suspect bad flyback, but since the set doesn't try to start, I'm not sure. Any one have any records on this, or a schematic? Thank you. Jeff Dougherty Intrepid Video TV/VCR _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
