Joe;
There must be more to this then you are saying. I don't know why someone
would tell you he had the schematic, but to busy to help you.
Doesn't make sense.

-Ed-
Tel-Tek Electronics
Ontario-Canada
[EMAIL PROTECTED]

----- Original Message ----- 
From: "Joe Dickerson" <[EMAIL PROTECTED]>
To: "ELECTRONICS PROFESSIONALS LIST" <[EMAIL PROTECTED]>
Sent: Saturday, April 17, 2004 8:45 PM
Subject: Re: [Techs] FIX: Philips HDTV mod 43pp920217 chas DPTV305
dead/chirps


> jUST A NOTE....
>    I wrote in with a problem I was having with a Zenith (99 model) and
> was told (by the respondent) he didn't have time to make a copy of the
> schematics. The print was NLA, so I passed it on to the customer and
> lost the repair on that one. So much for "helping" each other.?
> Joe
>
> LeRoy Westlund wrote:
> > Thanks for the tip, Ronnie.
> > This is a classic example of the type of help we need, to survive in
this
> > business.
> > If we can collect more of these HDTV tips, we will be better prepared
when
> > the time comes for us to face the newer sets. You guys build my
confidence,
> > when you make posts of this quality !
> > Keep up the good work.
> >
> > LLW
> >
> > LeRoy Westlund
> > Westlund TV & Electronics
> > 97 North Main                                "Where there's a will,...
> > Centerfield, UT 84622-0087           There's always a way."
> > Ph./Fax  435-528-3822
> > mailto:[EMAIL PROTECTED]
> >
> > -----Original Message-----
> > From: Ronnie Alston <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> > Date: Thursday, April 15, 2004 11:25 AM
> > Subject: [Techs] FIX: Philips HDTV mod 43pp920217 chas DPTV305
dead/chirps
> >
> >
> >
> >>Philips HDTV mod 43PP920217 chas DPTV305
> >>Symptom: Dead set/chirping condition
> >>Problem: 7045 CONV AMP IC on LSB panel STK392-120 Part #932212344682
> >>(Replaced both 7045&7044).
> >>Problem isolation: Removed plug 1516 from main power supply/deflection
> >>board. Powered set back up and picture tubes then lit up with no
chirping.
> >>   Plugged 1516 back in place and when desoldering pins 1&8 (-35&+35v)
set
> >>came on, no more chirping. Isolated problem to 7045.
> >>
> >>Many, many thanks to those who sent PDF files,
> >>Ronnie Alston
> >>Alston's TV Service
> >>110 North Third Street
> >>Ozark, Ark, 72949
> >>[EMAIL PROTECTED]
> >>
> >>
> >>_______________________________________________
> >>Tech Repair CD...order your just $49.00 plus shipping...One year of
updates
> >
> > free.
> >
> >>www.intrepid-video.com www.tech-repair.net
> >>Techs mailing list
> >>[EMAIL PROTECTED]
> >>http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
> >>
> >
> >
> >
> > _______________________________________________
> > Tech Repair CD...order your just $49.00 plus shipping...One year of
updates free.
> > www.intrepid-video.com www.tech-repair.net
> > Techs mailing list
> > [EMAIL PROTECTED]
> > http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
> >
>
>
> -- 
> Joe Dickerson
> Joe's TV & Appliance
> Rt 1 Box 3781
> Jasper, Texas 75951
> (409) 384-3325
> use same no. for fax
>
>
> _______________________________________________
> Tech Repair CD...order your just $49.00 plus shipping...One year of
updates free.
> www.intrepid-video.com www.tech-repair.net
> Techs mailing list
> [EMAIL PROTECTED]
> http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com


_______________________________________________
Tech Repair CD...order your just $49.00 plus shipping...One year of updates free.
www.intrepid-video.com www.tech-repair.net
Techs mailing list
[EMAIL PROTECTED]
http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com

Reply via email to